1.- Sauccer LED rings for Attack from Mars (AFM): Rings of RGB digital Leds for Attack from Mars sauccers. Small ring install 16 RGB Digital Leds, each led controlled individually color and bright with controller board. Connect each ring with next ring with only 3 wires and first ring connect to controller board also with only 3 wires, so you may install a full kit of Led rings in all sauccers of your AFM only with 3 wires sauccer to sauccer. Big ring for main saucer install 48 RGB digital Leds, each one also controlled individually color and bright. (for more features see below controller board)
2.- Bumper Led: a round board to install in any bumper, this board install 86 RGB digital leds in top and 4 in bottom sides, each one controlled individually color and bright, connect to controller board with only 3 wires. May connect up to 3 bumpers in same pinball to play synchronized effects. (for more features see below controller board).
3.- Spirit Ring (TOM): Board with leds for Theatre of Magic Spirit Ring. This board install 120 RGB Leds, each one controlled individually color and bright. Connect to controller board only with 3 wires. (for more features see below controller board).
4.- Magic Trunk (TOM): This is a new magic Trunk design for Theatre of Magic. Developed with resistant fiber, replace the original simple plastic cover with a new design that install a total of 391 RGB Leds, each one controlled individually color and bright. Connect to controller board with only 3 wires. (for more features see below controller board).
5.- Controller Board: All above LED boards need this controller board. This is a board that may control thousands of RGB digital leds with only 3 wires. Firmware is updatable with micro SD card to add new features, modify or add new visual effects or fix bugs, all updates may download by internet from my web site. Future firmware update will allow user add and modify his own visual effects stored in the micro SD card. Board include inputs to connect to switches matrix, lamps matrix, flasher and bumpers to trigger led visual effects according with status of switches, lamps, flashers or bumpers of playfield. May connect to speaker of pinball to capture sound, split it in bass, middle and trebble to play led effects according to sounds. May control up to 4 servos for another mods that use servo-motors. Include CAN bus and I2C ports to link to another boards. One power Output to control a shaker motor. May install additionally a bluetooth module for wireless communication with your cell phone to config and modify features and effects, next version will install Wifi to config wireless too.
For more information, pictures, videos and new products, check my Facebook.
Other of my mods in pinside: