Same as in the Rick & Morty thread, here's my prediction for the playfield ... if they keep on doing the mistake of showing the back, I will use it to my advantage

I suspect there will be a very dominant upper playfield because otherwise I can't justify all of that emty space in the top left.

And greetings to Cary who already used my last image in his R&M video.

Untitled12 (resized).jpg

Am I satisfied with my prediction image? Not really.
Did I spend 2 hours rebuilding it in future pinball? Oh absolutely.

Comments on the third image:
A - Probably a magnet.
B - Either this is to feed cables or another hole or kicker, but then I have no idea how that would be fed, maybe with a diverter.
C - There must be something else there because currently this looks ridicolus.
D - I think there will be some sort of diverter to either get the ball into the hole or VUK with the two lamps next to it, or to shoot though the bumpers.
E - I'm not sure if the leftmost hole is an insert or a real hole. Because if it's in insert it would be in the line between the two rubber posts which makes it look weird. If it's just a hole it might be reasonable to assume there is a rubber connecting the posts.
F - Along with E, big questionmarks on what that area is supposed to be if the two posts are not connected with a rubber.
G - Not sure what the two holes behind the scoop are supposed to do.
H - If there is a post the loop would be very tight but lines up better with the inserts, but also has a very weird bend. So I think there is no post and instead the metal guide ends right next to the target.
I - Unusual hole there, looks like it belongs to a drop target.
J - These are ALL small LEDs similar to Wonka. They are probably a crowd in the artwork and during gameplay they will flash so it looks like they are all taking pictures.
L - It's Eric so I assume you can somehow save the ball there.
K - Tilt warning inserts.

pasted_image (resized).pngpasted_image_2 (resized).pngpasted_image_3 (resized).png

Thanks!
I may have done this before

for a few different layouts now, e.g. see my twitter https://twitter.com/01proco
but I haven't finished a project completely ... it's just so much work ... and so I make a layout and playtest it, and then I already have an idea for the next one

Update from the last JJP image:
(referencing the last image of https://pinside.com/pinball/forum/topic/new-jjp-game-announcement-coming-soon/page/58#post-5881004 )
E - The posts are connected and there is a leaf switch.
F - I guess the ball will never end up there so nothing to expect there.
I - Definitely no drop target. Maybe a regular target instead? There is a switch in that area somewhere.

New things:
Why is the right green coil mounted like this?
The left one definitely belongs to the bottom bumper.
Is it maybe for a lift up ramp? That would also explain why there is a similar hole in the left ramp entrance, but I can't see any coil for that. Instead there is a node board.

pasted_image (resized).png

pasted_image_2 (resized).png

More things I noticed:

The bottom big hole definitely seems to be a VUK since there is a coil with that giant dark grey metal bracket.

The hole right next to it is a bit long instead of round and the only time I have seen that before is for the posts on lift-up ramps. E.g. see https://www.ipdb.org/showpic.pl?id=2765&picno=25888
So is the side loop actually a side loop AND ramp?

pasted_image (resized).png

Yes, I'm definitely bored. Please don't ask.

The dark grey metal bracket with coil thingy seems to be a lift ramp assembly, but a bit modified.
See https://www.ipdb.org/files/3072/Williams_1993_Bram_Stoker_s_Dracula_English_Manual.pdf#page=89

I also tried to line up some of the larger holes with the ball guides, but now the inner "loop" is kind of weird, I still don't know if there is a VUK and where the coil of that should be on the image, and also now that stage alley shot's guide has 0 holes for the screws which is also weird.

Man this speculation is fun.

For the image:
green - circuit boards and single boards for LEDs
blue - switches
red - mechs
purple - other things like node boards and these cable holders

EDIT:
The top 4 small holes line up perfectly with a flipper mech so I assume this is a flipper for the upper playfield.

pasted_image (resized).png

Can we please build a throne of pinball machine boxes? That would be cool for the next pinball show/event/expo! (when they happen again after the corona stuff)

If you look very closely you can actually read the text on the label

pasted_image (resized).png

Ok, I'll give myself a B+ for the layout speculations.

- Inner loop going up as in pic #1 was correct, but not quite exact (without a ramp).
- Inner loop turning in from #2 was actually the return from the upper PF, so yay I figured out that the ball would go there but not why. And no, it's not a VUK.
- In fact there is an up-down assembly, but for the ramp diverter.
- Stage alley shot goes into the third top lane, so that's why I said it looks weird, because it has a bend and the shot goes up there.
- And last, I did not add the gate and exit in the shooter lane in #2.

Also f** me this lightshow looks good.

Yeah I doubt they put in something like an audio analyser (no idea what the correct term is, I do web stuff not music software) to automatically generate the lightshow based on what is playing, similar to how some software for the lights in clubs and events works.