Guns N' Roses (CE)
Jersey Jack, 2020
Guns N' Roses (LE)
Jersey Jack, 2020
Guns N' Roses (SE)
Jersey Jack, 2020Quoted from RobF:They carry RGB control signals? That is a lot of RJ45 connections to one board...
That's standard for the WOZ 2.0 light system and beyond AFAIK.
One USB cable goes from the PC to that comm board, then ethernets out from him to all the nodes.
Quoted from LTG:Light grey ethernet cables for the light system. Used on WOZ 2.0 and JJP games after.
LTG : )
Not the bundle of cables Lloyd, the stake to the right of the bundle....it looks like it goes through the playfield?
Quoted from wyopin:Not the bundle of cables Lloyd, the stake to the right of the bundle....it looks like it goes through the playfield?
Those are pretty common - just pieces of plastic that give a place to ziptie cables against.
Quoted from zaphX:Those are pretty common - just pieces of plastic that give a place to ziptie cables against.
Ahhh...thanks!
that scoop in the middle is not a normal scoop. you can see on the latest picture that there are 2 coils under it (one left, one right)
Quoted from proco:Update from the last JJP image:
(referencing the last image of https://pinside.com/pinball/forum/topic/new-jjp-game-announcement-coming-soon/page/58#post-5881004 )
E - The posts are connected and there is a leaf switch.
F - I guess the ball will never end up there so nothing to expect there.
I - Definitely no drop target. Maybe a regular target instead? There is a switch in that area somewhere.
New things:
Why is the right green coil mounted like this?
The left one definitely belongs to the bottom bumper.
Is it maybe for a lift up ramp? That would also explain why there is a similar hole in the left ramp entrance, but I can't see any coil for that. Instead there is a node board.
[quoted image][quoted image]
Took a look at your site and it has some very impressive layouts and ideas! Hobby or ? Maybe JJP should be giving you a call ! 
More things I noticed:
The bottom big hole definitely seems to be a VUK since there is a coil with that giant dark grey metal bracket.
The hole right next to it is a bit long instead of round and the only time I have seen that before is for the posts on lift-up ramps. E.g. see https://www.ipdb.org/showpic.pl?id=2765&picno=25888
So is the side loop actually a side loop AND ramp? 
pasted_image (resized).pngQuoted from proco:More things I noticed:
The bottom big hole definitely seems to be a VUK since there is a coil with that giant dark grey metal bracket.
The hole right next to it is a bit long instead of round and the only time I have seen that before is for the posts on lift-up ramps. E.g. see https://www.ipdb.org/showpic.pl?id=2765&picno=25888
So is the side loop actually a side loop AND ramp? [quoted image]
There's an interview with Eric about POTC where he mentions that every shot should have more than one function. He loves diverters and other gadgets for that.
I don't see any custom megs and alot inserts on the main playfield.
So i hope its on the upperplayfield.
Looks like a fun game to play, the toys and graphics have to do the trick.
Can be a great game.
Quoted from RobF:They carry RGB control signals? That is a lot of RJ45 connections to one board...
Might do more on this game.
There are I think 10 on them in WOZ 2.0 from the HUB Board to each of the big light boards.
LTG : )
Quoted from wyopin:Not the bundle of cables Lloyd, the stake to the right of the bundle....it looks like it goes through the playfield?
Screwed to the playfield with one quarter drive head ? If so. That is a wire harness holder. Holds the bundle up from the wood.
LTG : )
Yes, I'm definitely bored. Please don't ask.
The dark grey metal bracket with coil thingy seems to be a lift ramp assembly, but a bit modified.
See https://www.ipdb.org/files/3072/Williams_1993_Bram_Stoker_s_Dracula_English_Manual.pdf#page=89
I also tried to line up some of the larger holes with the ball guides, but now the inner "loop" is kind of weird, I still don't know if there is a VUK and where the coil of that should be on the image, and also now that stage alley shot's guide has 0 holes for the screws which is also weird.
Man this speculation is fun.
For the image:
green - circuit boards and single boards for LEDs
blue - switches
red - mechs
purple - other things like node boards and these cable holders
EDIT:
The top 4 small holes line up perfectly with a flipper mech so I assume this is a flipper for the upper playfield.
pasted_image (resized).pngQuoted from proco:Yes, I'm definitely bored. Please don't ask.
The dark grey metal bracket with coil thingy seems to be a lift ramp assembly, but a bit modified.
See https://www.ipdb.org/files/3072/Williams_1993_Bram_Stoker_s_Dracula_English_Manual.pdf#page=89
I also tried to line up some of the larger holes with the ball guides, but now the inner "loop" is kind of weird
Could be trying to pay homage to the Data East by putting a G and R on the playfield in lane guides.
Quoted from PinMonk:My question is, who is that 7' tall dude at the end of the line? He looks like a giant.
Lolz. It's me. I'm standing /on/ the line.
Quoted from Hogbog:Lolz. It's me. I'm standing /on/ the line.
Eric the 7' tall creator!
Quoted from Hogbog:Lolz. It's me. I'm standing /on/ the line.
E-man....not even a pic of a coin door, back of machine, shooter lane pic....come on.....give me something.
I'm still digging the shot from the left flipper all the way up through the right top lane! But now I see it goes to some kind of mech. Another way up to the upper PF?
Quoted from RobF:They carry RGB control signals? That is a lot of RJ45 connections to one board...
one per node is better then stern ways to chaining the board one after an other.
Quoted from LOTR_breath:I'm still digging the shot from the left flipper all the way up through the right top lane! But now I see it goes to some kind of mech. Another way up to the upper PF?
Upper right flipper bank shot off of the sling with a switch to the center lane up top for super skill shot?
Quoted from KingBW:Upper right flipper bank shot off of the sling with a switch to the center lane up top for super skill shot?
Jeeeesssssuuuuus this going to be a fricken long weekend.
Says the guy waiting on Covid19 test results...
Quoted from Hogbog:Lolz. It's me. I'm standing /on/ the line.
Lording over your subjects...
Quoted from RobF:Lording over your subjects...
Blocking something that's behind him from being in the photo.
Quoted from Hogbog:Lolz. It's me. I'm standing /on/ the line.
That explains why you look enormous. Thanks for clearing that up!
Oh, and while you're here, for your next pin, PLEASE look at using AC power cords for the main machine connection with server style clips so they can't wiggle out over time. Just did troubleshooting on another machine where tried a bunch of stuff and it turned out that the power cord was just barely making intermittent connection on the back, having wiggled loose over time. They're likely around $1 or less in quantity.
Something like:
http://www.mca-midwest.com/stcableclip.html
Quoted from LOTR_breath:I'm still digging the shot from the left flipper all the way up through the right top lane! But now I see it goes to some kind of mech. Another way up to the upper PF?
Looks like a magnet up there that will take the ball somewhere. Like a monkey type mech?
Quoted from romulusx:Do you think we’ll get a teaser GnR pic from Eric today?
sure, another blurry, half focused picture of a line of sculpts or mechs that will look sorta like a top hat or rose or gun... we all need that today, right?
Quoted from Bublehead:sure, another blurry, half focused picture of a line of sculpts or mechs that will look sorta like a top hat or rose or gun... we all need that today, right?
Brought you here
Quoted from Bublehead:sure, another blurry, half focused picture of a line of sculpts or mechs that will look sorta like a top hat or rose or gun... we all need that today, right?
Do we know that’s "Guns N’ Roses" 100%?
I mean... Stern’s Avengers was out of the radar and all of those rumors were delayed after that one
Quoted from Bublehead:sure, another blurry, half focused picture of a line of sculpts or mechs that will look sorta like a top hat or rose or gun... we all need that today, right?
What the fuck is your problem?
Quoted from Rolls-Royce:Do we know that’s "Guns N’ Roses" 100%?
You don't, but "we" do.
Quoted from romulusx:Do you think we’ll get a teaser GnR pic from Eric today?
Hard to say.
He could be resting up. Monday is going to be HUGE !
LTG : )
Quoted from Rolls-Royce:Do we know that’s "Guns N’ Roses" 100%?
Guns N' Roses isn't even Guns N' Roses 100% anymore.
But it seems safe to say that yes, we do.
Quoted from paulbaptiste:[quoted image]
Countdown continues!!
Can we please build a throne of pinball machine boxes? That would be cool for the next pinball show/event/expo! (when they happen again after the corona stuff)
Quoted from romulusx:What the fuck is your problem?
Certainly not anything coming out of your pie hole. Take powder Francis.
Quoted from Bublehead:Certainly not anything coming out of your pie hole. Take powder Francis.
Dude watch your mouth!If you don't have anything productive to say,go elsewhere.
Quoted from paulbaptiste:[quoted image]
it literally says do not stack. That means no stacking designers too 
Quoted from wcbrandes:Took a look at your site and it has some very impressive layouts and ideas! Hobby or ? Maybe JJP should be giving you a call !
Someone from JJP was on here and was "very fucking impressed", his words.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/new-jjp-game-announcement-coming-soon/page/60?hl=robf and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Frisco, TX
Vancouver, BC