(Topic ID: 179084)
Linked Games
The Hobbit
Jersey Jack, 2016
Topic Gallery
I like the lower one with the black letters. i always think how they should of made it metal instead of a sticker when i play it after playing GOT with its metal plate.
Evansville, IN
just ordered the black lettered one! will be a nice touch. how about a plate to replace the sticker on the head between the speakers to?
Quoted from flipnout1:Did you like the gold ring? The original is clear
yes i do like the gold ring. i like everything about the mod.
Orders were shipped today! Thanks to those that bought one. Once you get them let us know your thoughts.
Larry
Warrington
Quoted from flipnout1:The laser cut ones look killer on a Black Arrow Hobbit I think. That's why we made two styles
I think laser cut looks better and can't wait to put it on my SE! Thanks
I got the cutout one as well, since I have the LE which has the rustic bronze trim which I'm thinking will look nice.
Quoted from meSz:Any way to do the plate in gold (brass)?
Are these listed on the Pinside Market, didn't see them?
We probably could but the extra plating would add more cost. Since much of the machine is in stainless we decided to go that route.
The two versions are listed on my website
flipnoutpinball.com
Thanks for all the orders!
Larry
Quoted from flipnout1:Since much of the machine is in stainless we decided to go that route.
Valid point Larry, I was thinking from a SE Gold version. Did you use stainless steel sheets to cut them out from? If so, they make a Titanium (Gold) Stainless Steel sheet as well. It would eliminate the need to plate them thus making it cheaper to produce??? I'm by no means an expert, just throwing out an idea for those that have the SE version!
sorry already had my button done the flip flop of the one you sent ...
Quoted from BladeFury:Love it! Cheap sticker look gone, thanks for the creativity and please for the love of god do the top one between the speakers!?!??! Make it cutout to match my bottom and I'm in SOLD sorry already had my button done the flip flop of the one you sent ...
Does the LEDs show through the center on yours? If so how does it look? We kept ours clear for that reason
Quoted from flipnout1:Does the LEDs show through the center on yours? If so how does it look? We kept ours clear for that reason
Quoted from meSz:Any way to do the plate in gold (brass)?
Are these listed on the Pinside Market, didn't see them?
i would like to see the plate gold to match my mirror blades.
Quoted from J85M:Anyone done a before and after photo? Would be great to see the instant improvement.
Here you go!
Could the lazer cut one be cut from different stock instead of stainless steel? ie. brass/bronze etc?
Quoted from koops:Could the lazer cut one be cut from different stock instead of stainless steel? ie. brass/bronze etc?
Very nice and tasteful mod. I'd also think brass or gold would be a popular seller. Would this be a possibility down the road?
Quoted from libtech:You should add Canada to the shipping list so I can order one, looks great
Email me your address and I'll figure out shipping for you so you can but one.
Thanks
Quoted from stpcore:Very nice and tasteful mod. I'd also think brass or gold would be a popular seller. Would this be a possibility down the road?
Several folks have mentioned different colors so I'll look into it. If there is enough interest I could add them to the options.
Quoted from flipnout1:Several folks have mentioned different colors so I'll look into it. If there is enough interest I could add them to the options.
Count me in for one. I'll be checking back. Thanks!
1 week later
Just installed the laser cut Gold Ring Plate on a Black Arrow Hobbit. It looks awesome. Also installed my gold plated buttons on the flipper buttons using the black button from the original. I think it's perfect. I had to remove the transparent button from mine and the original Black button from original to make the one I installed.
Probably not going to make any more after this. Just not cost effective to make a few unless I charge a lot more
These are still available. My last post may have been confusing. I'm still going to make the current design just not any new metals
3 weeks later
1 month later
2 weeks later
Ottawa, ON
Quoted from KLR2014:Can you ship to The Netherlands ?
Yes I can ship internationally. Send me your ship to address and I'll send you a PayPal invoice.
Thanks
Larry
flipnoutpinball.com
1 month later
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
