Hello:

These are my new developments about new CPU boards for PLaymatic pinball with MPU-C CPU and RECEL System III. Both with a new design, with modern components, replace battery and Ram by NVRAM, all games stored in one ROM, select game with microswitches.

See more information and products in my Facebook:
https://www.facebook.com/Pinballsp/

Other of my mods in pinside:

https://pinside.com/pinball/forum/topic/mp3-sound-board-for-wpc-data-east-system-11
https://pinside.com/pinball/forum/topic/domo-led-for-star-trek-ng
https://pinside.com/pinball/forum/topic/new-cpus-for-playmatic-and-recel-system-iii
https://pinside.com/pinball/forum/topic/mp3-sound-board-for-black-feverattack-torpedounderwater-and-more
https://pinside.com/pinball/forum/topic/dmd-led7-by-pinballsp
https://pinside.com/pinball/forum/topic/new-led-boards-for-afm-tom-and-universal-bumper-by-pinballsp

PLaymatic_mpuc_(resized).jpg
RECEL_SIII_(resized).jpg

Do

Do you know what kind of CPU install your pinball ??, I do not find any information about it in IPDB or Tecnopinball. I will do also CPU for MPU-V Playmatic models. I you may put pictures about CPU of your pinball may check it, or if you have schematics about it.

Current information I have about pinballs supported by CPU are following:

MPU-C:
======================
Antar
Attack
Black Fever
Cerberus
Evil Fight
Zira
Mad Race

MPU-V:
======================
KZ26
Trailer
Star Fire
Skill Fight
Nautilus.

Hello.
Sorry for so late reply, I did not see your message up to now.

Yes, I will sell these boards, though are not yet available, hardware is ready but software need yet some tests before may release it. Price will be 100 Euros + shipping.

Now Im busy with DMD Led ST32 development and some personal projects, I hope soon will may finish MPU-C and Recel SIII CPU boards, may check status and news in my Facebook https://www.facebook.com/Pinballsp

Kind Regards

Hello.
This is already an old project, it was left to finish, and with the time I have to devote to the DMD and the hologram kit, I do not think that I can finish it soon.

Recently, I sent this plaque to a friend who was very interested in his Recel, in fact I started this project because he asked me, since there is no replacement for these CPUs, nor do the spider chips that install the original plate exist, so when they break down, they have no fix and many of these machines end up being cut or go directly to the trash.

This design that I did was obsolete, initially with a PIC32 microcontroller and some Chinese sound modules, the current design would be with an ARM microcontroller, surely an RT1020 and for the sound (advanced) a Kinetis MK64 or MK66 microcontroller.

In summary, there is no news about this project, I'm sorry.

No, I'm sorry, I'm not going to make those boards, I just made a prototype that I gave to a friend to use on one of his machines. For now it is a closed project.