New Barracora Mirco playfields now available

But even if you preorder it, it does not mean you get one...

-11

#5 5 years ago

JAX

Cherries_Jubilee

Pinside member

5y 34,150 199

Fake News, as they are being done "On Demand" so they will Always be available.....Stop trying to start Trouble > AGAIN

OP
Quoted from Highclasspinball:
But even if you preorder it, it does not mean you get one...

#6 5 years ago

???

Highclasspinball

You put this in here. Not me. I got requests for this playfield and that why it is ready now. No need to say here that somebody else is almost ready...

These are available now. For shipping on Monday, arriving in the usa Wednesday or Thursday...

Regards,
Mirco

#7 5 years ago

STY

Pinstym

Pinside member

Tinton Falls, NJ

11y 93,550 1,177 14

You're in his FS thread advertising another company's product and telling him to stop making trouble? No matter what he did, that's not a move that somehow makes you better.

#8 5 years ago

JAM

TxJay

Pinside+ Frequent

Allen, TX

9y 61,300 926 10

Quoted from Pinstym:
You're in his FS thread advertising another company's product and telling him to stop making trouble? No matter what he did, that's not a move that somehow makes you better.

100% Agree, that's a dick move!

#9 5 years ago

JPD

Dayhuff

Pinside member

Battle Creek, MI

11y 126K 6,349 79 11

Great game that is finally getting the recognition it deserves and the prices on them lately are reflecting that. Nice job on the playfield, looks good.

John

#10 5 years ago

JGI

John_I

Space Coast Pinball

19y 179K 9,070

The recent Mirco playfields I've seen up close are simply beautiful and from the pictures this one is looking superb. This is a great game that is worthy of a new playfield.

#11 5 years ago

???

jkashani

Pinside+ Frequent

Greystone Park, NJ

9y 119K 3,589 6

Looks great!

#12 5 years ago

WOZ

woz

Pinside member

I sent Mirco my Barracora playfield to use as a sample at the end of last November.... that's a quick turnaround to production!

#13 5 years ago

JER

Jjsmooth

Glad to hear finally available. Ordering.

#14 5 years ago

JOE

yfz450

Pinside member

12y 76,800 1,306

OP
Quoted from Highclasspinball:
You put this in here. Not me. I got requests for this playfield and that why it is ready now. No need to say here that somebody else is almost ready...
These are available now. For shipping on Monday, arriving in the usa Wednesday or Thursday...
Regards,
Mirco

Are you going to have these at pinfest? I will be buying one!

#15 5 years ago

???

Highclasspinball

Yes there will be a limited quantity at the pinballsales booth. Please let me know till Monday evening if you plan to pick something up as ast shipment leaves Tuesday morning....

I had many other things same time, that why production too so long. There are currently 5 more titles almost ready but I will not have the time to finish them before going on vacation...

Regards,
Mirco

#16 5 years ago

???

Highclasspinball

Sorry i did not get it right. The Texas shipment leaves Tuesday morning, the pinfest one will be end of April, so no hurry for those. For tpf I would need to know till Monday...

Regards,
Mirco

#17 5 years ago

JER

Jjsmooth

Received in 6 days.
Nice work.

IMG_20190322_121033_01 (resized).jpg

#18 5 years ago

PNX

xeneize

Pinside+ Frequent

11y 104K 1,418

woz Cannot thank you enough for providing the donor!

Seeing this deck makes me want to order it now and bump Barracora all the way up to "NEXT" in my playfield swap queue!

Great job, Highclasspinball !

#19 5 years ago

WOZ

woz

Pinside member

Quoted from xeneize:
woz Cannot thank you enough for providing the donor!
Seeing this deck makes me want to order it now and bump Barracora all the way up to "NEXT" in my playfield swap queue!
Great job, highclasspinball !

Glad that I could help Barracora owners in some way. Mirco did ask the hard work . I still can't believe how quickly he got this into production as I only sent him the playfield at the end of last November 2018!

#20 5 years ago

JGI

John_I

Space Coast Pinball

19y 179K 9,070

Quoted from woz:
I only sent him the playfield at the end of last November 2018!

Wow! That is an awesome sign of things to come. My previous experience dealing with the other guys always resulted in long waits and my selling the game a long before the playfield ever came out.

#21 5 years ago

WOZ

woz

Pinside member

IIRC Mirco also produced the Black Hole and Haunted House playfield sets within 6 months of announcement.

#22 5 years ago

LBJ

Pinside member

Middletown, NY

11y 36,300 361 21

Please hold one for me for pickup at Pinfest as well. Do I need to make a deposit?

#23 5 years ago

FAQ

SurlyOldPunk

Pinside member

Detroit, MI

5y 32,650 73 7

Highclasspinball

Question: it’s really hard to see from the photos, does this have the green insert ball lock arrow in the upper playfield (above the 1-6 rollovers)?

#24 5 years ago

JER

Jjsmooth

Yes

15534524474131497663071 (resized).jpg

#25 5 years ago

JER

Jjsmooth

I'll post a few pics as I go.

1553454074290285582154 (resized).jpg

#26 5 years ago

JER

Jjsmooth

15534541495611038544532 (resized).jpg

#27 5 years ago

FAQ

SurlyOldPunk

Pinside member

Detroit, MI

5y 32,650 73 7

Jjsmooth thanks man!! Your swap is looking good

#28 5 years ago

HEP

High_End_Pins

HEP

Matthews, NC

12y 142K 12,518

Quoted from Jjsmooth:
I'll post a few pics as I go.
[quoted image]

The front hole for the right flipper lane looks a bit off.
Is it the art or actually alignment?
Not being critical just pointing it out because it is easily corrected now.

#29 5 years ago

HEP

High_End_Pins

HEP

Matthews, NC

12y 142K 12,518

Quoted from High_End_Pins:
The front hole for the right flipper lane looks a bit off.
Is it the art or actually alignment?
Not being critical just pointing it out because it is easily corrected now.

It is the alignment just double checked the pictures.
The holes for the inlane guide t nuts should be centered with the bushing hole on the right side like they are on the left side.
Again not being critical just pointing out the error so it can be tweaked by the installer or manufacturer.

#30 5 years ago

JER

Jjsmooth

Good eye, Chris. I will look into my options tomorrow. I'm quite surprised, because even the dimples on this pf have been spot on.

#31 5 years ago

???

vec-tor

Pinside+ Addict

Unknown

7y 91,150 4,598 83

Jjsmooth why are your yellow eject hole plates upside down?

#32 5 years ago

WOZ

woz

Pinside member

I just checked my playfield which was original NOS; the inlane guide supports are not centered in the artwork. I would suggest that you install the flipper with rubber first and then mount the return guides align so as to avoid flipper hop.

#33 5 years ago

JER

Jjsmooth

That's right, they are not centered in artwork.

15535277054811388179427 (resized).jpg

#34 5 years ago

JER

Jjsmooth

But the lower hole is 1/8" to high. I have contacted Mirco, so he is aware.

15535277765651198452421 (resized).jpg

#35 5 years ago

JER

Jjsmooth

I will oval the hole and use larger standoffs at bottom of both sides.

1553527933228150518854 (resized).jpg

#36 5 years ago

JER

Jjsmooth

Quoted from vec-tor:
jjsmooth why are your yellow eject hole plates upside down?

Haha. Because I am an idiot..

#37 5 years ago

LEO

Arcade

Colorado Canyon

Beaumont, TX

11y 120K 6,323 16 34

Just saw this playfield at TPF.
It was stunning.
Only sad part is that we sold our Barracora last month.
Got tired of waiting on CPR.
Had no idea these were coming.
Oh well on to a new Seawitch playfield I guess.

#38 5 years ago

WOZ

woz

Pinside member

Quoted from Jjsmooth:
But the lower hole is 1/8" to high. I have contacted Mirco, so he is aware.[quoted image]

Please check the guide alignment when the flipper is installed to ensure you don't get flipper hop when the ball rolls down the guide. The guide should be just higher than the flipper rubber.

It would be a shame to have that hole moved back only to find out it was in the perfect position .

#39 5 years ago

JER

Jjsmooth

Of course, I will set final location according to flipper.

#40 5 years ago

MUD

shimmydisc

Pinside member

12y 59,050 167

I think Cliffy makes non-flipper hopping lane guides for these Williams games.

#41 5 years ago

JER

Jjsmooth

That's what I'm using..

#42 5 years ago

JER

Jjsmooth

Used a chain saw blade file to oval the hole.

IMG_20190325_114028469 (resized).jpg

#43 5 years ago

JER

Jjsmooth

Took a little less than 1/8" to get it right with flipper.

IMG_20190325_153159241 (resized).jpg

#44 5 years ago

JER

Jjsmooth

And large stand off covered and looks right.

IMG_20190325_153208495 (resized).jpg

#45 5 years ago

LEO

Arcade

Colorado Canyon

Beaumont, TX

11y 120K 6,323 16 34

Quoted from Jjsmooth:
And large stand off covered and looks right.
[quoted image]

Looks great.
Just curious. Did you put something in the hole to keep the screw from riding back up?

#46 5 years ago

JER

Jjsmooth

A nice touch I noticed on these is the bevel on all holes where post or screw going. Eliminates possible pulling up of clear coat for those who might not do this on their own.

IMG_20190325_153309889 (resized).jpg

#47 5 years ago

JER

Jjsmooth

Quoted from Arcade:
Looks great.
Just curious. Did you put something in the hole to keep the screw from riding back up?

I flattened the points on a t-nut so I could adjust final spot in the oval I made. Once I got the oval where I needed, I went back to pointed t-nut.
It's not moving.

#48 5 years ago

LEO

Arcade

Colorado Canyon

Beaumont, TX

11y 120K 6,323 16 34

Quoted from Jjsmooth:
I flattened the points on a t-nut so I could adjust final spot in the oval I made. Once I got the oval where I needed, I went back to pointed t-nut.
It's not moving.

Ah yes, the old hammering in of the T-nut ploy.
Well played sir.

2 weeks later

#49 5 years ago

JER

Jjsmooth