I'm assembling 2 of the Bally -35 repro PCBs that are found on Ebay..pretty much exact copy of the original PCB.
Curious how much you'd sell the bare board for?
You're currently viewing posts by Pinsider Joey_N.
Click here to go back to viewing the entire thread.
This topic is linked to a classified ad.
The Ad Listing has been ended, so this topic closed automatically.
I'm assembling 2 of the Bally -35 repro PCBs that are found on Ebay..pretty much exact copy of the original PCB.
Curious how much you'd sell the bare board for?
Thanks. I will likely buy a board in the near future! OK, here's another question..
I am going to need a Stern 100 type MPU for a Dracula.
I can't find any good info for converting a -35 into a Stern 100, so have nearly given up on building a 'new' MPU for it.
Would it be possible for me to build your PCB up in such a way as to use it in Dracula?
Quoted from barakandl:Hi Joey,
When the board is in Bally Mode, it will work just fine in Stern MPU100 game.
The ROMS would be setup on 2732s at U2 and U6. That means the original 2kb ROMs would be doubled up to 4kb images.
copy /b MPU100-U6.716 +MPU100-U6.716 MPU100-U6.732
So, I would jumper it just like a -35 board with the E jumpers, but use the modified ROMs like you say? Hmmmmmm...
I am interested in a bare PCB, as I probably have a lot of the parts, and the correct ROM chips for Dracula, if you can do that. Thanks.
You're currently viewing posts by Pinsider Joey_N.
Click here to go back to viewing the entire thread.
This topic is linked to a classified ad.
The Ad Listing has been ended, so this topic closed automatically.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/new-bally-35-stern-mpu-200-repro-boards?tu=Joey_N and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.