Quoted from jclausing:Please add me for the next run. Thanks!
Cool man your added
Quoted from JeepSnob:tdiddy please add me to the CM loop fix list. Thanks! Can’t wait!
Added....gonna be a week or so
Sir, can you add me to the list for your next run of these mods! I'm so glad I found this thread...that shot has been KILLING my games. This community is awesome! Joe
Quoted from Joeynelyse:Sir, can you add me to the list for your next run of these mods! I'm so glad I found this thread...that shot has been KILLING my games. This community is awesome! Joe
Quoted from Frito539:I’d like to be added to this list as well!
Quoted from xsonics2k2:Please add me to the list as well, thanks!
Quoted from Wolfmarsh:Add me to the list as well please!
Gotcha, all added....
Quoted from kettchxxii:Toss me on there while your at it!
Quoted from Charger68:Put me down for one
On the list
I'm not sure how this works as I am new to pinside, but would love to be added to the list. Do you contact me when the batch is ready to get my address?
Quoted from pinballmike150:Please add me to the list
Quoted from erds:I'm not sure how this works as I am new to pinside, but would love to be added to the list. Do you contact me when the batch is ready to get my address?
Both added.....give we about a week
Quoted from smeuninx:Please add me to the list.
Quoted from FLpinball:Please add me to the list. Thank you!
You guys are on the list
Got it installed today. Simply put, yes. This is a solid upgrade. Went from 80% to 20% rejects. Do it.
So, I have a bit of a theoretical question: had Stern/Elwin designed the ramp with the habitrail going all the way down to the entrance on the left side (where this mod currents fills the void...), would the rejection problem have been there to begin with, or would it still be there, just less pronounced than it is with the mod?
Quoted from boagman:So, I have a bit of a theoretical question: had Stern/Elwin designed the ramp with the habitrail going all the way down to the entrance on the left side (where this mod currents fills the void...), would the rejection problem have been there to begin with, or would it still be there, just less pronounced than it is with the mod?
I think that Elwin and the game testers are really good with shot control and after play testing for months the issue wasn't that pronounced to them possibly.... just my 2 cent
Quoted from boagman:So, I have a bit of a theoretical question: had Stern/Elwin designed the ramp with the habitrail going all the way down to the entrance on the left side (where this mod currents fills the void...), would the rejection problem have been there to begin with, or would it still be there, just less pronounced than it is with the mod?
The original design wireform did cover the hole, you can see it in Jack Dangers streams (he got Keith's prototype machine which also has a plastic ball-hold post by the tower) and I think the stern LE pic on the stern website showed it too. Someone posted pics of it in the owners thread as well but there are a lot of posts to wade through now.
Didn't make it to prod obviously hence this awesome mod.
Quoted from BMSPEED:Please add me to the list. Thank you!
Quoted from Beyndtstng:Add me to the list as well. I’m over this. Thank you.
Quoted from robnotto:I would like to be added to your list. Thanks!
All added ..... should get a PM this weekend, just about caught up
Quoted from play_pinball:Can someone post the install video? My brother’s has been sitting for weeks and I wanna install it.
Sent it
Quoted from Slimey1:Hi, can you pls add me to the list for the marvel loop mod? Thanks!
On get it
#1 of 32021-05-10 22:36
https://pinside.com/pinball/forum/topic/new-aiq-black-panther-mod
This will be the final installment for AIQ from Diddy Mod's.
The Black panther mountain was my original brainstorm idea that started this modding adventure, and after many self taught lessons in 3d modeling and a few mods in between, I'm finally able to you this.
The model is designed to be tucked into the back right orbit and for ball to pass under it from both shooter lane and right orbit after it passes under the panther legs it will continue into Mount Bashenga. Each model will be hand painted and clear coated with UV protectant clear and will have a purple led strip included. The right side will have a felt protector for anyone that has mirror blades or graphics to protect against any scratches that my happen.
20210504_222839 (resized).jpg20210506_191006 (resized).jpg20210506_191048 (resized).jpg20210506_191053 (resized).jpg20210506_191059 (resized).jpg20210506_191256 (resized).jpg20210506_191300 (resized).jpg20210507_084841 (resized).jpgmba0100_comp_v0147.0893 (resized).jpgAre there instructions for installing? I see the part, adhesive and two foam pads. Is there an optimal placement for this? All the way to the left? Towards the top or towards the bottom?
Quoted from reznik6044:Sent PM, please add me to the list of the Captain Marvel Loop fix. Thank you!!
Gotcha
Quoted from The_Gorilla:New to the game. I'd like on the list
I'll add you to the list... gonna be a week
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/new-aiq-captain-marvel-ramp-fix/page/4?hl=mikedenton49 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.