http://www.bayareaamusements.com/

Bay Area has them in red and black.

LTG

Are these the same size as SC flippers or the mini like on TZ and TAF? SC flipper rubber is impossible to find and what BAA has in their ring kit is wrong.

^should be the exact same thing (Sega/Stern/Data East #545-5207, Bally/Williams #23-6553).

They aren't. SC flipper rubber is larger.

Huh, guess I have no idea then - according to the manual you need one small red flipper ring, part #23-6553-4

Never used these guys before but they have red and black 1 inch I.D. flipper rubbers, http://www.competitiveproducts.com

The actual flippers on SC are smaller than regular flippers but the upper right is the same as the minis on TAF and TZ. PBR use to carry the correct size for SC main flippers but no longer has it. I had about a dozen pair but have given it away over the years. The rubber BAA sends in their rubber ring kit is for regular flippers and is too large, the upper mini flipper rubber can be used but you have to stretch it killing some bounce.

Would be nice if someone made the correct size which is why I was curious about the size of the flipper the OP was talking. Having more than one pin needing this size strengthens the argument for someone to remake it.

SC rubber is either 1 1/4" or 1 5/16"

If the OP just needs the size for the other minis lmk as I have about a dozen.