New! Dark mode!

Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!

(Topic ID: 115624)

Need system 11 mpu CPU for pinbot system 11a


By Droptargets

5 years ago



Topic Stats

  • 11 posts
  • 8 Pinsiders participating
  • Latest reply 5 years ago by codered9394
  • No one calls this topic a favorite

You

Linked Games

#1 5 years ago

I need a system 11a CPU for a pinbot without battery damage. I think a few other system 11a may work. I just don't want to pay for a overpriced rottendog replacement. I have paypal.

#2 5 years ago

I have a feeling that finding a functional system 11 board will not be much cheaper than the rottendog but good luck. pinbot is one of my alltime favorites

#3 5 years ago
Quoted from Droptargets:

I need a system 11a CPU for a pinbot without battery damage. I think a few other system 11a may work. I just don't want to pay for a overpriced rottendog replacement. I have paypal.

I had the same issue, needing a system 11 mpu for my Pinbot a while back. I didn't want to pay that much for the Rottendog replacement, so my Pinbot sat dead for a few months. I finally decided to suck it up and buy the replacement and I am glad I did! It was expensive but I do get to play my Pinbot without any issues any time I want!

#4 5 years ago

I picked one up to repair last week from another forum member to repair and resell. It will be less than a Rottendog CPU. It has zero corrosion, but has a few jumper wires on the back side to repair some traces. If you have interest, send me a PM. I have a few board repairs ahead of it, but I think you could be in business within 2 weeks.

#5 5 years ago

I'm hoping these become available soon. Not sure they are going to be any cheaper though.

http://www.pinballpcb.com/System9-11cMainBoard.html

#6 5 years ago
Quoted from mcluvin:

I'm hoping these become available soon. Not sure they are going to be any cheaper though.
http://www.pinballpcb.com/System9-11cMainBoard.html

More so for the system 9s that it will bring back. System 11 board replacement aren't unobtainable but those 9 boards are tough.

#7 5 years ago

Strange, I have about 8 sys11 mpu's sitting in my garage... and a couple rottendogs. Don't ask me why when i only have 4 sys 11's.

Yes i have boards in all my machines as well.

#8 5 years ago
Quoted from boris_37:

Strange, I have about 8 sys11 mpu's sitting in my garage... and a couple rottendogs. Don't ask me why when i only have 4 sys 11's.

Yes i have boards in all my machines as well

Do you have a 11b cpu that you may want to get rid of? I need one for a Mousin Around that i am trying to get working. I'm also looking for a left display, Not going to spend any major money untill i know that i can get it working. Pm me.

#9 5 years ago
Quoted from mcluvin:

I'm hoping these become available soon. Not sure they are going to be any cheaper though.
http://www.pinballpcb.com/System9-11cMainBoard.html

Thanks for posting this, I wasn't aware of it. I have a Pinbot and a Taxi and having one of these boards would be nice to easily cover both machines.

I had an older Rottendog board, but there was a problem with Pinbot. It had the pop and sling switches mixed up or something. My understanding is that this was fixed with the new board with dipswitches on it.

#10 5 years ago
Quoted from codered9394:

Do you have a 11b cpu that you may want to get rid of? I need one for a Mousin Around that i am trying to get working. I'm also looking for a left display, Not going to spend any major money untill i know that i can get it working. Pm me.

pm'ed

Quoted from TOK:

Thanks for posting this, I wasn't aware of it. I have a Pinbot and a Taxi and having one of these boards would be nice to easily cover both machines.
I had an older Rottendog board, but there was a problem with Pinbot. It had the pop and sling switches mixed up or something. My understanding is that this was fixed with the new board with dipswitches on it.

my only concern is the page says last updated in 2013. Having never shopped here before is this guy even in business let alone still working on producing these boards? Has anyone been in contact with them?

Just curious.

#11 5 years ago
Quoted from boris_37:

my only concern is the page says last updated in 2013. Having never shopped here before is this guy even in business let alone still working on producing these boards? Has anyone been in contact with them?

Just curious.

Just got a pm from him.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside