Twilight Zone
Bally, 1993Hey im wondering if anyoone can help me with this. I need some detailed photos of the clock/piano light wire harness form Twilight zone. ANy help would be greatly appreciated. if anyone is in NJ area, it would be great if I could take a look in person becasue I also have to make a bracket for the clock as well. Thanks
ya Ive been looking at it and its a little confusing. A picture or two would really help me out. The J3 connector of board A-16220 is pretty straight forward but J2 an the seperate piano lights have me a little unsure.
I will try to get some when I am back home on the 1st. In the interim, image 6 in the installation guide I made for Ingo's clock has a glimpse of the bracket. I will try to get more detailed measurements for you when I photo the harness.
http://www.garrett-jess.com/tz/ikclockinstall/Clock_Installation
Finally! Thanks man.. I really appreciate it.. I laid it out on paper according to the manuals and ordered all the parts to make one today...just wanted something to reference to make sure it was the right thing.. That's exactly how I have it laid it.
Wow these are perfect.. Thanks so much Mike99 and PinWillie!.... I have one more request.. Can one of you draw up a little drawing of the bracket with dimension as in lengths of the sides and angle that it tapers out from the 90 degree bend..I mean I can probably get the angles from PinMikes pic but length of the sides would be great! Doesn't have to be super high tech.. Just a little hand drawing would be fine... You can tell me to pound sand if you want but it would be a great help.. Lol... Thanks again guys
Joey, I tried taking pics of the wiring connectors for the sample TZ opto boards. The pics were out of focus so here is the pin out.
Two opto boards on the bottom of playfield.
Right opto board:
J1-1 grey/purple dash
-2 grey/blue dash
-3 grey/green stripe
-4key
-5 grey/yellow stripe
-6 grey/orange stripe
-7 grey/red stripe
-8 grey/brown dash
-9 black/ no color
-10 black/ no color
J2-1 orange/purple stripe
-2 orange/blue dash
-3 orange/green dash
-4 orange/yellow stripe
-5 orange/black stripe
-6 orange/red dash
-7 orange/brown dash
-8 key
-9 grey/ no color
-10 grey/no color
J3-1 green/grey dash
-2 white/purple stripe
-3 white/blue stripe
-4 white/green stripe
-5 white/yellow stripe
-6 white/orange stripe
-7 white/red stripe
-8 white/brown stripe
-9 key
-10 black/no color
-11 grey/yellow stripe
-12 empty
Left opto board
J1-1 empty
-2 grey/blue dash
-3 grey/green stripe
-4 key
-5 grey/yellow stripe
-6 grey/orange stripe
-7 grey/red dash
-8 grey/brown stripe
-9 black/ no color
-10 black/ no color
J2-1 empty
-2 orange/blue stripe
-3 orange/green dash
-4 orange/yellow stripe
-5 orange/black stripe
-6 orange/brown dash
-7 orange/red stripe
-8 key
-9 grey/ no color
-10 grey/no color
J3-1 empty
-2 grey/yellow stripe
-3 black/no color
-4 key
-5 white/brown stripe
-6 white/red stripe
-7 white/orange stripe
-8 white/yellow stripe
-9 white/green stripe
-10 white/blue stripe
-11 white/purple stripe
-12 green/purple dash
Hope this helps,
Dave
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-some-pics-of-tz-clock-wire-harness and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Monroe Township, NJ
Edmonton, AB