Torch
Gottlieb, 1980I'm having to rewire the front door to the CPU A1J6. I have the schematics. Have a decent idea what I need to connect. I believe it's 7 wires total in a 9pin connector. A closeup picture of the wire colors and in what pins would be great. I've rebuilt this machine. Connecting the front door is the last thing. Thanks in advance!
In lieu of a photo, here is a pinout chart from Cleopatra. The colors will likely be different. However, the function of each wire should be unchanged. You may be able to use this in combination of your game's switch matrix to figure out which wire goes where. Note that the three digit number in the square box is the wire color. There should be a chart in the schematics somewhere showing what the number codes mean.
Quoted from ForceFlow:In lieu of a photo, here is a pinout chart from Cleopatra. The colors will likely be different. However, the function of each wire should be unchanged. You may be able to use this in combination of your game's switch matrix to figure out which wire goes where. Note that the three digit number in the square box is the wire color. There should be a chart in the schematics somewhere showing what the number codes mean.
Man. Solid info. Thank you. So I'm assuming the pins (if you're looking at mounted cpu) go 9--->1 and not 1--->9?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-pic-of-torch-a1j6-connection and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
