Black Belt
Bally, 1986My buddy picked up a Black Belt recently, and after some research realized the mushroom bumper at the end of the shooter lane has been replaced with a common stand-up switch. I couldn't find any part numbers searching the manual for the mushroom bumper assembly, does anyone have the part #(s) or a link to an assembly i could purchase?
Thanks!
A365-00091-0300
This might be the top part of the assembly
http://www.marcospecialties.com/pinball-parts/C-616-3
And this the base
http://www.marcospecialties.com/pinball-parts/0365-0937-0800
Do a little research, you should find what you need.
Marco shows unavailable , might give Steve Young a call to see if he has body available http://www.pbresource.com/pfbumper.htm
there is a rubber ring around that bumper body it's a 7/16" ring 
https://user.xmission.com/~daina/tips/pub/tip0117.html
Quoted from chas10e:Marco shows unavailable , might give Steve Young a call to see if he has body available http://www.pbresource.com/pfbumper.htm
there is a rubber ring around that bumper body it's a 7/16" ring https://user.xmission.com/~daina/tips/pub/tip0117.html
Good to know! I'm planning on placing an order with PBR soon anyway, so I'll be sure to inquire with them. Only other one I've found so far is like $45 from flippers.com.
Good news! The Pinball Resource has all the parts i need. For future reference, here's the part numbers:
Cap (yellow): C-616-3
Body: C-617-8
Complete assembly w/springs, nut, etc (and yellow cap): AS-2291
One other question: what type of switch does a mushroom bumper use? I've never seen one before. Can anyone post a pic of the switch?
Thanks!
Regular leaf switch with some biscuits ... the pic is from an EM table Joust I have but recall it was the same on my
Fireball Classic I am guessing you'll need the diode / capacitor matrix like your other score switches.
http://www.pinballlife.com/index.php?p=product&id=618 ? maybe you can disassemble the stand-up target that was there.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-part-s-for-bally-ss-mushroom-bumper and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Point Pleasant, NJ