Nascar
Stern, 2005I need to replace connector CN2 that connects to the CPU / Sound Board as my current connector is cracked in places and a wire has come off. It is a 6 pin connector with position #5 keyed. The manual says it is part # 045-5015-06. I can't find that on Marcospecialties or on Pinball Life. Can somebody point me to the right item? If you know what kind of metal connectors I'll need to use with that, that would be helpful too.
Thanks!
I have nothing here to look at but isnt this just a 6 pin .156 connector? Great Plains electronics would have the plastic connector and you would need the metal pins that go into it as well as a good crimper.
Everything you need can be found here...
https://www.greatplainselectronics.com/categories.asp?cat=37
You'll need a good crimp tool also.
Have fun!
--
Chris Hibler - CARGPB #31
http://www.Team-EM.com
http://webpages.charter.net/chibler/Pinball/index.htm
http://www.PinWiki.com - The Place to go for Pinball Repair Info
Quoted from Flippingr8:It was the 0.156 size spec that I was looking for. Thanks for the info!
Hi, old thread here. I’m looking for that same connector. Can you advise what you bought? I need the same connector for my Southpark
Quoted from ChrisHibler:You'll need a good crimp tool
I have this, Does it fit that category? Thanks
https://www.greenlee.com/products/CRIMPING-TOOL%2540cTERMINAL-(POP).html
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-part-for-stern-nascar-cpusound-board-connector-c2 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Delafield, WI