I need some help with the right inlane/outlane post. This is the post that supports the ramp. As you can see from the photo, mine consists of three parts. There is a lower post that screws into the playfield and has a black rubber on it. Next, there is a hex post that someone tried to attach with glue to the bottom post. Lastly, there is a second hex post screwed into the lower hex post. Naturally, I have a few questions:

1. Can anyone tell me what the proper configuration should be?
2. Exactly what parts do I need, and where can I find them?
3. Can someone please take a photo that shows what it should look like?

Thanks!

WH2O_post.jpg

Thanks for the help, guys! Based on Bryan's photos and the parts list in my user manual, it looks like there is supposed to be one of these posts on each side:

http://www.marcospecialties.com/pinball-parts/02-4677

I'm also pretty sure this hex spacer screws into the top of the right one and supports the ramp:

http://www.marcospecialties.com/pinball-parts/02-4250-21

So I guess now it's just a matter of finding these parts. Neither Marco nor BAA has either of them in stock. Any suggestions?