Silly question. did you check the slam tilt switch? Make sure the contacts aren't touching, or the lugs that the wires get soldered to aren't touching. Maybe something fell on it and is causing the switch to read a closed contact.
You're currently viewing posts by Pinsider fatpanda.
Click here to go back to viewing the entire thread.
Silly question. did you check the slam tilt switch? Make sure the contacts aren't touching, or the lugs that the wires get soldered to aren't touching. Maybe something fell on it and is causing the switch to read a closed contact.
Quoted from KYLEDM5:I just got done switching out the ULN2803. I now have use of my coin door buttons, but now it says, " Check fuses f115 and f116, j112 and opto 12v supply" when I turn the machine on.
When I go into test report, I get "L. Accel Sw. Stuck, C. Accel Sw. Stuck and R. Accel Sw. Stuck".
Those might be the magnet optos in the back, if I recall correctly. Something is shorting out the fuses so I would do a thorough visual to see if there are any janky wires, lugs, etc. floating around. Check what each of those fuses relate to and go from there.
You're currently viewing posts by Pinsider fatpanda.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-help-with-slam-tilt-stuck-closed-on-no-fear?tu=fatpanda and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.