The manual lists the part number for the long posts that support the jump ramp, but it doesn't show the lower post that the long post screws into. My No Fear has some weird post there that doesn't belong. Does anyone know which short post I should order? The long post has 8-32 threads. I looked at the posts page in the manual, but I couldn't tell the hole size from the pics.

Thanks,
Paul

Looks like I have the wrong long post too. One of the ends is supposed to be 6-32, and mine is 8-32 on both ends.

One of my posts is complete, but I am not sure if it is correct either. It looks like the lower post is very short, and I don't see anything that looks like that on the posts page in the manual. I didn't have time to take that one out last night, so I will try to do it tonight.

I know how that is. I just remembered I forgot to take pics of my RFM translite for someone on here. lol

I would definitely appreciate the pics if you have the time to take them. Thanks.

Thanks for the pics. It looks like the lower posts for the jump ramp supports are the same as the other posts that use the rubber tubes. That makes sense. The long post that I have is the wrong part too, so there was not one correct part in this assembly. lol

Just placed an order with Marco, so hopefully this will be put together soon.

Thanks,
Paul

I could use one that is all put together if it isn't much trouble. I don't know if there is supposed to be a washer in between the upper and lower posts. I havent found a good enough pic online that I can zoom in on.

I just want to make sure I have the ramp support at the right height so this jump ramp doesn't crack like the old one.

Thanks,
Paul

Thanks! Looks like I don't need a washer there, so this should be pretty easy to put together once I get the parts.