Requesting some help on the correct wiring for the right flipper coil to switch contact on a Laser Ball machine.
Little history, started with a dead machine and have completed work on the backboard hardware and display, then when to work on the playfield. I have stripped the playfield top and bottom and am now 98% done. My problem, I don't know how the main right flipper is connected to the switch and I don't know how it is wired because it was not there to take pictures of.
I started out with a single switch with wires taped ...will it was crap. I ended up buying a machine that was going to be parted out. WOW. this machine had parts on the top and bottom of the playfield that still looked new. I cut the switch out to transplant and forgot to take a picture. Big mistake. Now I am lost.
This is where I am at now, not sure what lugs to place which wire, and this is where I need the help.
