Spinner linkage is probably snapped inside the spinner itself. If so, you can fix it with music wire quite easily.
You're currently viewing posts by Pinsider Russo121.
Click here to go back to viewing the entire thread.
Spinner linkage is probably snapped inside the spinner itself. If so, you can fix it with music wire quite easily.
Quoted from markmon:This is actually unlikely to be the case.
Its been the case with my own, 9 year owned No Fear on two occasions with original spinners. The original wire goes all the way through the spinner body itself. To tell if its snapped, all you have to do is look at the spinner dead on and see if the end of the wires are in line with each other. If not, its snapped or about to. Not so sure that's the case here, just what i have experienced.
ebay.com link: NEW K S Small Diameter Music Wire Asst 20 520
You're currently viewing posts by Pinsider Russo121.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-help-fixing-no-fear-spinner?tu=Russo121 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.