You're currently viewing posts by Pinsider bingopodcast.
Click here to go back to viewing the entire thread.
Lido and Bahama Beach have different features - the magic screen feature unit and the mystic lines feature units are quite different (as you say).
Bahama Beach has the unit documented in the manual. Page 10 shows the rivet side of the unit, but it also shows the index position of the spider that sits on the rivets.
Each spider finger has a particular letter associated with it. 'A' for example, is at the 12 o'clock position, and it is wire color 30.
Hope that helps!
oh, well, it would probably help if I told you the whole story...
all of the wipers marked with arrows should have continuity. A quick way to check if you have it on correctly is to put your meter on continuity and put one probe on the solder point, and the other on the wiper in question. If the meter beeps, you're good to go!
Be very careful when reassembling, as the wires can be pulled and snap off or worse, shear off the solder point. Just an extra word of caution, in case you need it. 
You're currently viewing posts by Pinsider bingopodcast.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-help-bahama-beach-bally-bingo?tu=bingopodcast and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Richmond, VA