Eight Ball
Bally, 1977Any chance someone can tell me the color wiring pattern. Bottom connector on the j5 connector on the solenoid driver or the p5 on the new master solenoid board. I got them all firing now but in the incorrect order. I think that is where the issue lies now. Any help is greatly appreciated.
This is for Bally 8 ball
3711E3E6-AD97-4B7B-815C-77193D12FC18 (resized).jpegFrom the schematic it looks to be the black/white is the left most pin (then go from there)
eight ball bally (resized).jpg
EDIT: looks like some colors may have changed you may have to go to the locations on your playfield to match the wire color to the termination point ( ie. "side return kicker" )
Making progress. My struggle has always been the left side switch solenoid when it you lose the ball down the ramp when it hits the switch and fires.
The other one that is killing me is the ball return to the plunger solenoid when you lose the ball to shoot it back over to the plunger. I replaced the switch and the wire on the solenoid is brown and yellow. I test continuity. I cannot figure out where for the life of me where this goes. You guys have been fantastic on this board. I really appreciate the help.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-help-8ball?hl=bigal56 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Providence, RI