Adventures of Rocky and Bullwinkle and Friends, The
Data East, 1993
Back to the Future: The Pinball
Data East, 1990
Batman
Data East, 1991
Checkpoint
Data East, 1991
Hook
Data East, 1992
Lethal Weapon 3
Data East, 1992
Phantom of the Opera
Data East, 1990
Robocop
Data East, 1989After having problems with the hold power on my flippers I realized that I used an older wiring harness from the transformer to the power supply. I was wondering if someone can take a pic of their data east power supply connector (the wire side) CN1, specifically pins 10 & 11. I am trying to see if there are 2 wires going to each pin. This would apply to any data east game after phantom and before Jurassic park. Thanks!
It is! But it only adds to my confusion. Do you know if the gray wires from pins 10 & 11 lead to the transformer or the flipper board? Thanks so much!
I will have a look inside the machine. I guess these grey wires are Vac from transformer for audio supply but will let you know in a few minutes.
That would be awesome. Mine does go to the transformer. The book says the flipper board wires go to those pins. Wires are the same color too. Could you trace the wires from your flipper board, cn2, pins 6&7? You are a huge help in all of this. Thank you!
Quoted from dieseldogpi:Could you trace the wires from your flipper board, cn2, pins 6&7? You are a huge help in all of this. Thank you!
I'll take a dive again 
hold on
Thanks so much! I think I am completely missing that harness. So I'm guessing that is spliced into the wires that hit the transformer and cn1 pins 10&11? I can probably splice in? This was huge btw. Thanks for taking the time to trace that out. A lifesaver.
Quoted from dieseldogpi:So I'm guessing that is spliced into the wires that hit the transformer and cn1 pins 10&11?
Correct, made a complete picture with locations and colors of it.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/need-a-picture-of-data-east-power-supply and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Mount Sinai, NY
you're my hero! Thanks again! Before I realized the harness was different, I was killing myself trying to figure out why I had no 9v at the flipper board. Thanks again!!