Quoted from Vince_Giannini:

Anyone in the Chicago area interested in linking our Fastbreaks? I have the space and everything to make the cable.

Quoted from pcprogrammer:

I did also have some leftover blue playfield GI lights leftover from my last order. They were 1smd blue frosted bayonette, I played a couple on the left and right under the ramps to make it blue there, but I didn't want to overdo it. You might want to order half a dozen of those too.

Quoted from pcprogrammer:

Here is how mine turned out.

Quoted from vbobrusev:

i am restored mine cabinet. what i did with mine cabinet.
1) Remove old decals with sanding machine or heat gun. i use heat gun.
2) Use universal putty for remove all dents and make all surface flat
3) When universal putty will be dry you sanding machine one again for make surface flat.
4) I recommend use primer for whole cabinet and then paint all cabinet.
5) Then apply vinyl decals like on video with IJ machine ( if you need decals for cabinet, i have it ) No other tricks, two methods dry and wet, i prefer dry
6) if you need paint only sides inside cabinet i think just sand it, clean and paint.

Quoted from vbobrusev:

i am restored mine cabinet. what i did with mine cabinet.
1) Remove old decals with sanding machine or heat gun. i use heat gun.
2) Use universal putty for remove all dents and make all surface flat
3) When universal putty will be dry you sanding machine one again for make surface flat.
4) I recommend use primer for whole cabinet and then paint all cabinet.
5) Then apply vinyl decals like on video with IJ machine ( if you need decals for cabinet, i have it ) No other tricks, two methods dry and wet, i prefer dry
6) if you need paint only sides inside cabinet i think just sand it, clean and paint.