Could someone please tell me what type of screw goes on that metal bracket that holds the blue bumper on the left side where big bobs is? Specifically I'm trying to determine what type head the screw is.
Thanks!
You're currently viewing posts by Pinsider DocRotCod.
Click here to go back to viewing the entire thread.
Could someone please tell me what type of screw goes on that metal bracket that holds the blue bumper on the left side where big bobs is? Specifically I'm trying to determine what type head the screw is.
Thanks!
Heck if someone could even upload a pic of how that metal bracket attaches I would appreciate it. I think the one I got from Marco is too tall.
Quoted from MrSanRamon:The bottom 2 pictures is how the part fits my game.
The part on the top is from the Pinbits website and the lower part is from the Marco web site. The pictures show them as identical.
Compare those pics to the picture of the part in the game.
If you install the part, note that the bolt hole is up and toward the end of the long ball guide and the width is longer than the height. At least that is how I had to install it to get it to work.
The Marco part would be down and toward the end or up and away from the end long ball guide, as it looks like it's wider than high.
Now the bracket I got may be weird and theirs may fit if it goes in exactly like is shown in the Pinbits picture...that is the height and width are about the same.I think if you cut the bottom (the right side in the Marco picture) off a bit, it will fit and work.
Hope you guys can understand this rambling post.
Robert
Yeah. I appreciate the info. It would definitely require a cut. The way it is now I tried forcing it under the lip and it won't budge. Plus if it would, it would gouge the playfield over time.
Don't know how I could get a clean cut. With a dremel it's so fast I don't think it would look good.
You're currently viewing posts by Pinsider DocRotCod.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/nbafb-owners-club?tu=DocRotCod and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.