Hey FB'ers! Question...I am trying to replace (well, add for the first time, I suppose...mine has been missing since I got it) the little guide bracket that holds the blue bumper bit by Crazy Bob's. I ordered a new bracket from Marco, but hell if I can figure out how to align it and make it work. Nothing looked right. Here's a couple pictures of what I've tried. Anyone have a decent image of that piece that might shed some light on it for me? Thanks in advance!

PXL_20210507_130310041 (resized).jpg
PXL_20210507_130439716 (resized).jpg

Great, yes that does help clarify, thank you. I did find the images from the other post in this thread. I will definitely have to grind a little bit off of the bottom to make it fit. But otherwise should be good! Cheers.

I also designed stencils for new spinners. Was able to redraw the basketball and had a few tests made. They worked pretty good! If anyone wants the art file, just shoot me a message. Happy to share.

PXL_20210421_201901421 (resized).jpg

Has anyone put a plastic (or other kind of) cap on the pop bumper under the right ramp? I think it looks kinda dumb with nothing covering it, but as far as I can tell that's just how they were made. Not sure if there's enough clearance to put a plastic over it to match the other bumper with the plastic lid on it.

Has anybody ever done anything with this cap-less pop bumper under the right ramp? I debated getting an additional plastic for the top, similar to the other pop bumper, but not sure if it would fit. I just think it looks ridiculous as-is.

PXL_20210425_142542160 (resized).jpg

I'm trying to track down some replacement lamp sockets. I've tried ordering new replacements from several sources, and none fit. The contacts aren't wide enough and don't reach the pads on the PCB. I'll include an image of the bad new ones and the good originals. Anybody here have some extras they don't need? DM me know how much! Thanks in advance.

PXL_20210507_121856113_2 (resized).jpg

I don't need any more than that. Would gladly take whatever ya got. Lemme know!

Sweet, keep me posted. Happy to swing out and pick up if it's easier!

This is the guide bracket I bought. Fits good, with one tweak: you will have to file/grind a little bit off the bottom, it's just a teeny bit too tall to fit in there.

https://www.marcospecialties.com/pinball-parts/04-10253