(Topic ID: 273836)

Coin Acceptors, Inc. .05 .10 .25 Combo Coin acceptor issue

By DropTarget

3 years ago



Topic Stats

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    View topic image gallery

    image (resized).jpg
    image (resized).jpg
    image (resized).jpg
    Coinco NDQ acceptor (resized).jpg
    IMG_5285 (resized).JPG
    IMG_8627 (resized).JPG

    You're currently viewing posts by Pinsider droptarget.
    Click here to go back to viewing the entire thread.

    #1 3 years ago

    Hi,

    I'm trying to repair a Coin Acceptors, Inc. coin acceptor. It's for a Williams Lucky Strike, but was used in other machines of that era. It accepts .05, .10 and .25 coins through a single coin chute.

    Here's a couple of pics.

    NOTE: I found some of the missing pieces and figured out where that counter weight goes. Now it accepts nickels and the diverter is working (it wasn't earlier). However, it rejects quarters about 90% of the time. AND.... what is that cast part that's attached to the bottom right side of the separator cover plate? It certainly doesn't belong there.

    TIA
    IMG_5285 (resized).JPGIMG_5285 (resized).JPGIMG_8627 (resized).JPGIMG_8627 (resized).JPG

    #4 3 years ago

    Great,

    Thanks for all of the help and useful information. I think the quarters problem is that the magnet has lost strength. Luckily as Ken mentioned, these were used in various vending devices. I happened to have the upper parts from an old Vendo Pepsi machine. I swapped it for the one from my Lucky Strike, made a few mods and all is good now. The next thing to do is fabricate the coin switch spring levers that the coins hit to add credits. Someone removed two of them.
    You can see the one I’ve made from a guitar string.

    image (resized).jpgimage (resized).jpgimage (resized).jpgimage (resized).jpgimage (resized).jpgimage (resized).jpg
    #6 3 years ago

    Thanks Ken,

    I kept the original frame and everything from the separator down. I changed the guts, all of the components that are on the spring loaded axel. It was the the same set up, except for an additional cam. Boy it was tough swapping that out, lots of tension on that spring.

    What drove me nuts for a while was I had three mechs and I was trying to make one good one. But even though the parts looked interchangeable, they were just slightly off. That was until I realized that 2 of the three were National Acceptors and the one I needed was a Coin Acceptor Inc model. At first the nickels weren't dropping correctly, I fixed that. That's when the quarters stopped dropping correctly.

    Then I realized that had had the guts from my old Vendo lying around. Luckily the swap worked.

    I just made new springs from a 17 gauge guitar string. Now the game operates as it did when new, although I did bend the credit reel switch so even though it will coin up, it's still set on free play. Now to fill the hole someone drilled in the coin door when they installed a momentary switch to add credits .

    You're currently viewing posts by Pinsider droptarget.
    Click here to go back to viewing the entire thread.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


    This page was printed from https://pinside.com/pinball/forum/topic/national-5-10-25-coin-acceptor-issues?tu=droptarget and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.