I think i remember reading this that stern got super lazy and i guess the hole drilling guy went on strike and since tournament mode was not used on dale jr games, they wired the start button to the lock down bar button.

No they aren't drilled for a start button. Start button is in the lockdown bar.
I don't have a picture of it..

Found this: Cabinet

https://pinside.com/pinball/forum/topic/nascargrand-prix-owner-and-fan-club/page/13#post-3780327

And this Apron

https://pinside.com/pinball/forum/topic/nascargrand-prix-owner-and-fan-club/page/11#post-3430691

Learned something new today. I guess no one else at the factory knew how to adjust the chuck on a drill. I would have thought the hole was automatically CNC'd out of the front panel. I'm curious to know if it was and then backfilled with a plug. Moving it to the lockdown bar is just dumb and lazy. If I had a Dale I would definitely do what Spiderpin did, or probably even drill out the cabinet and put it where it should be.

There was no hole drilled on mine. If someone wants to see inside of my cabinet I'm happy to share. I'm not changing mine.

Screenshot_20221021_152229_Gallery (resized).jpg

Are you sure that's brown/blue? It looks dirty white/blue in the photo.

The manual for this pin is fantastic. It should help you narrow down what goes where. It can be grabbed right off the Stern website.

BRN/BLU J8 pin7 feeds #6 Garage Kicker. Section 3 Chapter 2 Page 21

That's what I see in your picture.

Good to know it's working as it should be. Now head to garage. and get racing

Having a problem I can’t figure out on Grand Prix, I added a Flipper Fidelity speaker kit today and that should have nothing to do with the issues it now has. I’m getting three different error codes but all three of them work fine, however the up post in the top center of the playfield that acts as a diverter to the pop bumpers no longer activates in test mode or in game play. I seem to have checked everything I can think of but I’m stumped.

In addition, we checked the transistor and it fires the post but it still isn’t coming up in game.

C947C179-C22E-40F3-ACDA-F410D096EA9F (resized).jpeg

Have a Stern Dale JR NASCAR translite for sale.

$40 shipped in the US.

Pm if interested.

314FFDA5-21D8-4377-9B9E-41E95FBB3F4B (resized).jpegD699715E-AF9D-427E-9E09-5B3BC4ED7A3B (resized).jpeg

anybody have spare plastics? need over the captive ball/flasher and lower left magnets. Maybe some others like clears that sit on right side by captive/launch lane. Let me know! thanks

b1ccac837202108f3cd3a55d82e0e0378b8c888b (resized).jpg

f4feffc4e01661770432e694b4c0375f1a03c357 (resized).jpg

i have the pieces you circled in the first picture. i replaced them with some thicker ones i made myself to support the 1/64 scale cars i put on there

Do you have the captive ball one circled in red as well or just the clear ones circled in green? thanks

Anyone have a spare “test car” mine cracked and is falling apart. Thanks

ya im pretty sure i have all the original pieces you circled from the right hand side there

PM Sent

Anybody else have the one over the bottom left magnets? thanks

I have questions! Help me out guys, appreciate it.

1)What are these metal brackets in the lower cab, one on each side?

2) I have a bunch of connectors not connected..are they supposed to be?
- First one is lower left side in backbox - blk/org and blk/yel
- next is red/blk and red/white ...I think its for dmd panel speakers...mine aren't wired yet
- next upper left backbox, 2 connectors with blk and red wires
- next middle left backbox blk and red wires
- last under PF left-side by diverter orange and blk/purple wires

3 Need help wiring in bash car. Can you just confirm this is correct?
Looks like grey/green wire (marked 1 in pic) goes from main large coil to wire harness?
Looks like yellow/purple (marked 2 in pic)daisy chains from far right coil to middle main large coil then to harness?
Looks like brown/green wire (marked 3 in pic) coming from circled connector goes to far right side coil?

2022122795182920 (resized).jpg

2022122795182934 (resized).jpg

DSC06522 (resized).JPG

DSC06524 (resized).JPG

DSC06525 (resized).JPG

DSC06528 (resized).JPG

DSC06532 (resized).JPG

DSC06520 (resized).JPG

Any updates on if anyone made a pinsound package for this?

I’m not sure, but I put a Flipper Fidelity speaker kit in mine.

What did you think about Flipper Fidelity and the sound change? Does flipper fidelity have an amp with it or is it a speaker replacement?

It came with an amp, it’s a little better now, but not mind blowing. I’d only recommend it for games that can utilize it more, or if it’s one of your favorite games. I’m addicted to Grand Prix so I’m going all out on it, making it the best I can.

I think you should take a look at the manual for this one. I am not at my game but if someone can take the glass off and shoot some pics im sure it would help to compare.

Got the car sorted, assuming the connectors in the head are not utilized as everything seems to be working. And I'm thinking the brackets in the lower cab on each side has something to do with playfield spacing, read a note about something like that. Thanks

nice nice, good to hear you made progress.

I got a few extra 2nds translites that I am offering to the group here for a substantial discount. They have minor printing defects but they would basically be moot from playing position.

send me a PM/DM for more details and pricing!!

pasted_image (resized).png

Hi, wanted thoughts on the following. I have a broken wire on a switch for the garage. It's pretty straight forward, see photo. However I haven't soldered anything for 30 years. Can I just heat the existing solder and attach the broken wire without issue? I'm hoping I could just heat it up and stick the wire in it. Thoughts?

E0537940-D61B-4B9E-9B90-3E19F2F0FF02 (resized).jpeg

You can try to just heat up the Solder and see if you can attach the wire I have done this in the past.

Yes you probably can. It looks like it has already been resoldered before with a big glump of solder. Don't be afraid to get in there and resolder if needed. Get the solder gun nice and hot first, also may have a solder sucking tool and some new solder that has flux already added. You would get the solder hot or liquid-suck it up and then resolder. If you do not do very many repairs the cheaper ones from Pinball Life will do the job.

https://www.pinballlife.com/temperature-controlled-solder-station-50-watts.html
https://www.pinballlife.com/kester-rosin-flux-cored-wire-solder-sold-by-the-foot.html
https://www.pinballlife.com/desoldering-pump-solder-sucker.html

Thank you both

Took the plunge to install LEDS Titan Rings and clean and wax this nasty playfield. My fingers hurt.....

20230121_141819 (resized).jpg

After many hours of cleaning it I had the pleasure of waxing it.....

20230128_123053 (resized).jpg

how come you changed out all the star posts, which ones did you use to replace?

I'm using the new stern post. I wanted to go with black red and white colors. I'm making more changes with this I will share when I have them completed.

20230129_085848 (resized).jpg

Anyone have any apron card designs they could pass down?

http://aproncards.com/index.php/nggallery/pinball-apron-cards/nascar

Hoping someone can help. My NASCAR sound is acting up. Sometimes its perfect, other times it doesn't work at all and most of the time the sound is scrambled / sped up / distorted. I replaced all sound ROMs with no luck. I'm thinking there might be a cold solder joint on the board. I thought I'd ask the group.

Another sound issue:

Anybody here running a generation 1 Pinsound board with the original sound package download (only one available I could find)?

Just got mine going today and the sound cuts out, changes volume at times, has lag like I hit a jackpot and it doesn't announce it for a second or 5. All this is not consistent and varies as well. I read somebody saying that most pinsound original sound files have issues and are not the best.

Volume overall seems quiet as well like I have to almost max out game volume at coin door and turn the volume pots on the pinsound board to like 3/4 turn to get a decent volume.

Anyways just seeing if anybody else experienced this or if I have something else going on?

---side question, is there any way to have it not play drive 55 during multiball and just another random background music???

I'm talking factory sound package option and existing adjustment, not creating my own. thanks

My sound went out and U8 might be the problem. I tried to repair it, but no luck. Anyway, I'm buying my first Pinsound board hoping it'll fix the problem. Does anyone have any cool music downloads to go with NASCAR?

I've seen no post about updated sound files for Nascar. My plan is to purchase a pinsound board at some point and make my own sounds.

Someone please make a Talladega Nights audio

I'm would asked on the pinsound forum. I have been working on mine doing a topside tear down. I'm sure someone would make the sound file.

Just an update, Pinsound fixed my machine. I have sound again. Now to have some fun and create a Motley Crew sound track.