Quoted from nosro:I'll add another: the Theatre of Magic trunk motor
There's a few left for $400+ on E-bay, but Judge Dredds planet motor is long obsolete.
Quoted from nosro:I'll add another: the Theatre of Magic trunk motor
There's a few left for $400+ on E-bay, but Judge Dredds planet motor is long obsolete.
Quoted from browne92:I've been thinking about trying my hand at some vacuum forming.
Quoted from nutshell79:Wcs ramps
PSP in Australia made WCS 94 reproduction ramps.
Shocked this was not posted.
-SS spider pointer
-SS spider
-SS in between art not the trans-lite the art behind that?
-SS pop bumper caps (the replacement is a darker blue)
I have a backup pointer and spider...
Quoted from nosro:I'll add another: the Theatre of Magic trunk motor
The gear box, yes.
But the motor is readily available.
Quoted from PennSkier:Not for ME - but in another thread, someone was looking for replacement parts for the little plastic village in Williams Fire!
These can be replaced with similar train set villages.
It's not IMPERATIVE to have, but the motor for the spinning back glass on Black Hole.
You have to order three separate things and modify one of them to make it happen.
Quoted from mwong168:3) NuCore computer for P2K titles are no longer being sold or made?
Wasn't this because NuCore could not work out an agreement with the license holders?
Quoted from bluevegas:I had a hell of a time finding a spider pointer for SS
Thought the Todd-meister found you one??
Not a pinball, but try to find the rubber clown head for a 61 midway deluxe shooting gallery! IMPOSSIBLE.
Not sure if this counts as popular, but ramps for Data East games. Two years to find a WWF ramp. The trade off with DE games is they are affordable, but if something breaks, good luck finding a replacement.
These aren't the most popular titles, but I've read about these parts being hard to locate:
Batman Forever: Large Green Double Ramp and Shooter Handle
Lost World: Ball Capture Motor
Quoted from dsuperbee:Thought the Todd-meister found you one??
No, I ended up ordering from a guy in Europe
Quoted from Craig:Clear plastic ramps for both Comet and Cyclone. Cycle jump for Comet.
Comet and cycle ramps for the "Comet". Comet ramp for the "Cyclone". Please, someone start to make these please!!!
Quoted from nosro:For example, Creature from the Black Lagoon has the hologram.
New CFTBL holograms are available. Gene Cunningham of Illinois Pin Ball remade them (different than the ones he made before). He had a big stack of them at the Texas Pinball Festival. $200 each.
Quoted from Ed_in_Texas:New CFTBL holograms are available. Gene Cunningham of Illinois Pin Ball remade them (different than the ones he made before). He had a big stack of them at the Texas Pinball Festival. $200 each.
Are these static or do they move?
Quoted from LTG:Base for largest tower in Medieval Madness.
LTG : )
Go to any sheet metal shop with the dimensions and they will make one for you.
I gave away my last two for restorations.
Quoted from Magic_Mike:Ed_in_Texas said:
New CFTBL holograms are available. Gene Cunningham of Illinois Pin Ball remade them (different than the ones he made before). He had a big stack of them at the Texas Pinball Festival. $200 each.
Are these static or do they move?
I believe they are lenticulars and not holograms. Someone posted pics in the CFTBL hologram thread.
http://pinside.com/pinball/forum/topic/creature-holo-reproduction/page/7
SOF could use some parts love. Right now the only part I want that i cannot find is translite. However, if my ramps, or wire guides were to break I would be SOL. Wouldn't mind being able to get a repo playfield, upper and lower. Mine is not in bad shape, but would be nice to have the option to get a minty one.
Quoted from starbase:Shocked this was not posted.
-SS in between art not the trans-lite the art behind that?
Backbox art impossible at this time. I had to get one made myself.
Bally P/N: A-12359-1 51.5" side rails for Atlantis. These rails have no cutouts for the flipper buttons.
Anyone comes up with some message me, I'm looking for a nice pair with no damage. Mine are dented from the top of the cabinet head being folded down.
Quoted from wayout440:Bally P/N: A-12359-1 51.5" side rails for Atlantis. These rails have no cutouts for the flipper buttons.
Aren't these just standard WPC rails?
Quoted from kbliznick:Aren't these just standard WPC rails?
No, the WPCs are A-12359-3 47" rails, the "-1" are 51.5"
Now that you mentioned it, I wonder if the shorter ones would work and how they might look, if you were to lose that 4.5" at the back, under the backbox. It wouldn't look original back there but might be better that dents on the top. Any opinions on this?
Quoted from o-din:nosro said:
I'll add another: the Theatre of Magic trunk motor
All still available, but if you want one new, you may want to hurry.
ebay.com link: 14 8018 THEATRE OF MAGIC Trunk Motor Gearbox pinball
The smaller DMD's (128x16) for Data East Games. I could use a new one, only the glass is available. I do have a new repo rope light for ST25 that I could add in a trade!
Quoted from wayout440:No, the WPCs are A-12359-3 47" rails, the "-1" are 51.5"
Now that you mentioned it, I wonder if the shorter ones would work and how they might look, if you were to lose that 4.5" at the back, under the backbox. It wouldn't look original back there but might be better that dents on the top. Any opinions on this?
+1
I accidentally bought a set of the shorter ones, and still toying with whether or not to use them.
Here's some pics of what they'd look like:
http://www.racepainter.com/pinball/temp/side_rails/
(note: these are the "raw" set from PL... my complete bad on the wrong size; not Terry's. I was thinking I was eventually going to get them powder coated a deep red.)
Quoted from o-din:All still available, but if you want one new, you may want to hurry.
Ebay link
1. Open the old gear box, clean & lubricate the gears.
2. Get on the phone and order the little motor from Steve Young for about $5.
You're welcome!
Quoted from Timerider:+1
I accidentally bought a set of the shorter ones, and still toying with whether or not to use them.
Here's some pics of what they'd look like:
http://www.racepainter.com/pinball/temp/side_rails/
(note: these are the "raw" set from PL... my complete bad on the wrong size; not Terry's. I was thinking I was eventually going to get them powder coated a deep red.)
Thanks for that info, and you can't get any better "what if" info than those pics! Thanks, looks like a possibility I will have to think about.
Look at that one shiny guy up by himself! This picture makes me cringe and want to throw it all in a polisher ASAP.
Also, for a second I forgot which thread I was reading... I thought it was the "pay it forward" thread and got excited, then double checked.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/name-unobtainium-parts-for-popular-titles/page/2 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.