I’m in!
Added to the lineup this afternoon
Proto #3417
Sadly I can confirm that there’s also one less machine out there hiding. #3499 was parted out many, many years ago. The previous owner of this one had all the backbox boards for 3499 that came as spares.

Any leads on the yellowish clear circle standup target would be appreciated. Mine is spider cracked all over and probably a few solid hits from being in pieces.

094BFE70-6576-4D9F-A512-C086E3236520 (resized).jpeg1470E98B-4D68-4C5A-95D9-9529A9DC7643 (resized).jpeg5189ADDE-D437-455D-8662-BED4BB02CDFC (resized).jpeg523A6C81-88DC-4896-8B15-7B69598F5ACD (resized).jpegA34791F8-8FBE-457D-8E11-368EB0261E75 (resized).jpegB312CE9D-A1C5-4027-9256-F9F028112186 (resized).jpeg

Hi TomDK,
Thank you. Very cool to have back to back pins off the line
Sounds like you definitely had a journey with yours getting it back in action. Haven't had a chance to put too many plays on mine yet, but like everyone alludes to, the sounds and music are very immersive!

REV3 roms were in there when I got it. I have Dancing Skeletons, the wizard guy for Tilt warning, and moving eyes for Painting mode.
So I think that would be the total REV3 roms set right?

Any other telltale signs?

So I had some time this evening, and a handful of left over leds laying around, and decided to Led the backbox. I noticed that the #44 bulbs in the bottom right and top left corners (enclosed by the reflector/deflector paper) do not work. The flashers in those areas work fine but none of the 44s. Any thoughts as to why just those sockets don’t work? All other bulbs / flashers are fine.

They don't work in lamp test either. Single or matrix. Don't work during any gameplay that I saw either.