OP

Quoted from Pookiegus:

1. On the card it says "Hitting 15 numbers resets pool ball rack". In testing the machine with the glass off - after hitting all 15 numbers nothing happens. All 15 balls stay down and the machine doesn't re-rack/reset the balls at the top. Is there one more switch or target you need to hit to have the pool ball rack reset? Is there a switch or relay underneath I should check for pool ball rack reset? After reading about this machine I am glad that it still has all the plastic pool balls that appear at the top as you hit the numbers.

OP

Quoted from Pookiegus:

3 When I hit the number 9 the ball drops at the top but the light doesn't go out. What switch would I check for that?

OP

Quoted from Pookiegus:

4. Sometimes I've gotten a few free balls on my first ball out of the gate.

OP

Quoted from Pookiegus:

The disk and wiper on the Ball Rack Advance Unit is not turning far enough when the 15th ball is hit. I pushed down on the disk and the balls reset/re-racked at the top.
Should I re-align the disk and wiper by loosening the screws on the front of the disk and turning it slightly so the wiper makes contact with the correct pin? Or do I loosen the allen screw at the back of the disk and realign that way?

OP

Quoted from Pookiegus:

The disk is adjusted as far as it can go clockwise. The allen screw wouldn't let me adjust it - it found the indent each time I tried.
Should I lengthen the slots on the disk with a drill so I can adjust it the 1 degree I need?

OP

Quoted from Pookiegus:

My last question is: why doesn't the 100 bell ring when I hit the ball 6 mystery score target light is lit? It should be worth 100 when the red mystery score target is lit

OP

Quoted from Pookiegus:

Where is that bell switch located?