Were you putting them in with the power on?Check for blown fuses.
You're currently viewing posts by Pinsider pinmike.
Click here to go back to viewing the entire thread.
Are you sure you have the correct Flasher LEDS in?Do you have a pic of the
Flasher LED?Im guessing they are the wrong ones.
Quoted from Pinoob:the bulb says 13vdc
That is correct for the flashers,Are there one or two metal prongs on
the LED bulb.
Quoted from Pinoob:There is 1 prong on both sides
Try moving the prong slightly over a little bit to the edge with your fingernail
then turn the LED and do the same on the other side.
The LED prongs are not making contact with the Flasher metal sockets.
Quoted from Pinoob:Yes the 906's are very bright but my girlfriend got me the complete set for Christmas and it is bugging me that I cant get them working.
LEDS are much nicer than the regular bulb
You're currently viewing posts by Pinsider pinmike.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/my-flashers-wont-work?tu=pinmike and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.