Dealer's Choice
Williams, 1974It's a Dealer's Choice. I was on my 2nd ball and as soon as it went past my flippers and into the trough, nothing happened. No reset of any of the playfield mechanics and no score bonus given. The only thing that works is the lights. I tested all the fuses and they all work. Any ideas where to go from here?
Did you check the switch where the ball drains to make sure adjusted properly and clean? And when testing fuses if you didn't, best to pull them out of holder and 'buzz' them out.
www.Team-EM.com
Thanks for the reply. I pulled all the fuses when I checked them. Switch seems adjusted properly, makes contact when the ball is in the trough. Cleaned between the switch just now. Still nothing.
Did the score motor fully finish it's run the last time it turned. Try turning it a bit and then see if the machine will start a new game.
Yes! Got her working again. Started messing with the switches in the reset relay and all of a sudden everything started working again. Thanks, all!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/my-em-pin-stopped-working and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Woodstock, NY
Pensnett, Brierley Hill, Uk