OP

Quoted from HoakyPoaky:

So I did this epoxy resin trick on my last build & it worked out well again.
I used painters tape to mask off the corners & create a mold to pour the epoxy. Then I waited about 24 hours and sanded with 150g sandpaper. Nice way to create a sharp strong angled corner.
Only two corners needed to be repaired. Got a little sloppy on the bottom of the cabinet as the resin leaked under the tape a bit, but no one will see that. Nice sunset tonight too!
Now it’s onto the bondo for the flat surfaces.
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]