Quoted from littlecammi:
I want to order NOW, but I'm not sure which way to go (LED or LCD).
(So glad he took the time to colorize the alternate images for my BOSS premium!)
Is the LED an easier install than the LCD ? I usually go LCD but I'm okay with LED if it fits better.
Does the LCD require any other parts (spacers, gaskets) to install in the Mustang panel?
First, thanks for the positive comment about coloring both versions
Re: installation
I only used an LCD panel when coloring the Pro and Boss. I had them in and out of each machine multiple times.
Installing in a Stern of this era is about as easy as it gets. When you order a display, you’ll get the correct spacers and a power cord that reaches the front of the machine where you tie into power.
You’ll want to order a clear plexi to replace the red one. ColorDMD is making a special plexi version that has cutouts for the bolts that hold the numbered plaque (BOSS and LE)
Also, for the BOSS and LE, the Mustang logo is held on with a ridiculously long bolt. It’s in the way for the LCD panel - but it’s easily trimmed with a Dremel. Only takes 30 seconds since you already have the speaker panel down and the old display out of the way.
Not sure if an LED would squeeze in with the bolt in place or not.
I’m anxious for people to download and try out the color version!