Quoted from little-italy:dig daddy ff kit
Put this in my STLE... awesome!
You're currently viewing posts by Pinsider asylum.
Click here to go back to viewing the entire thread.
Quoted from BLACK_ROSE:After lOOk-n at my speaker and the Big 10" , I'm wondering the same thing
The Big 10 will fit brother... just make sure you install it like my pictures show. It comes with a spacer that raises it up and if you install it like the factory speaker, (where the terminal is facing to the left) the rails will hit when you lower the playfield. The pictures are the Big 10 installed on my STLE.
Oh... and don't forget to use the rattle tap that comes with the kit - your going to need it!
IMG_0375.JPG IMG_0376.JPGQuoted from BLACK_ROSE:Thanxx 4 the pict Asylum ,, my Stang doesn't have the p/f rail's so i'm ok there ..
Welcome!
I thought for sure you would add them rails... especially the way you always trick out your pins!
Quoted from 85vett:do you have to cut the opening out bigger
No you don't... it comes with a spacer that goes over the factor hole. The sub is then attached to the spacer.
Quoted from smassa:I still don't understand why more people don't go with an external powered sub
I do both... I find that the cabinet speaker sounds way better with a FF or PPP speaker as they come with crossovers that clear up a lot of the distortion that the factory speaker has. IMHO
You're currently viewing posts by Pinsider asylum.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/mustang-pro-in-the-grg?tu=asylum and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.