Quoted from JMK:Looking for some help on an unusual issue.
I was re-installing my Munsters plastic shield after cleaning it; and somehow one of the small screws snapped inside the wood of the playfield.
I have no idea how to remove the stuck broken 1/2 screw which is lodged in the wood.
So frustrated that this could happen so quickly.
I’ve attached a couple photos from above and below the pf.
Any help would be greatly appreciated.
Thanks so much!
[quoted image][quoted image]
You should be able to use a screw extractor set to get it out. Worst case scenario you could drill the screw out as well...it just takes a drill bit that is just slightly smaller than the screw, but I would recommend that as a last, but completely feasible last resort. Hope this helps.