Here is a thread where I helped someone get their car flipper working. You can see if any of the info in there helps.
https://pinside.com/pinball/forum/topic/street-fighter-ii-car-flipper
You're currently viewing posts by Pinsider latenite04.
Click here to go back to viewing the entire thread.
Here is a thread where I helped someone get their car flipper working. You can see if any of the info in there helps.
https://pinside.com/pinball/forum/topic/street-fighter-ii-car-flipper
Quoted from rdb569:I don't see the options when the game is out of the Tournament Mode. The switch functions properly when toggled between on and off for Tournament. I pulled the MA1851 board (Control Switch Board A26). I tested for continuity at each of the solder points and all tested good. Does anyone know what the voltage should be at each pin on the control switch? Also, I noticed that on the Control switch where you plug in the wire harness, that it has 8 connections. The wire harness that comes in from the machine is missing 1 wire. So there are only 7 wires going into the harness, not 8. Does anyone know if one should be blank?
One pin should be empty, it looks like pin 8.
You're currently viewing posts by Pinsider latenite04.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/mulitple-issues-on-street-fighter-2?tu=latenite04 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.