(Topic ID: 265333)

Moving a NIB machine from Semi-truck

By StoneyCreek

4 years ago


Topic Heartbeat

Topic Stats

  • 20 posts
  • 13 Pinsiders participating
  • Latest reply 4 years ago by Lethal_Inc
  • No one calls this topic a favorite

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    View topic image gallery

    15F385AE-05D0-4A05-A03D-A5DF77065E6D.jpeg
    20200330_153313 (resized).jpg

    You're currently viewing posts by Pinsider stoneycreek.
    Click here to go back to viewing the entire thread.

    #1 4 years ago

    I have a very fortunate problem. I'm receiving my very first NIB pin tomorrow afternoon. Thanks to Melissa at Cointaker I likely got one of the very last JPs off the line before Stern shut down production due to the virus. Issue is, the local delivery company only uses Semi-trailers and I suspect they will not want to 'back down' my 150 yard gravel driveway as there is no way to turn around at the house. I'll see how daring the drive is sometime tomorrow, but likely he will just a) unload it at the road and leave it for me to deal with or, b) I back my pickup truck and put the pallet in the back.
    If a) - would I be able to move a 270 pound pallet with a residential-quality hand truck (I doubt it)
    if b) - how do I get the pallet out of my truck with just me and the Ms. here?

    I guess I could unbox it and lighten the load a bit, but then the pin is exposed in case something I do goes wrong on the gravel urf. 1st world problems...
    Here's a pic. of my driveway from the house. there is a sharp acute angle turn to the road on the left at the end of the driveway where the blue box is...tough for a semi to make that turn.
    Would love some creative ideas. thanks!

    20200330_153313 (resized).jpg20200330_153313 (resized).jpg
    #5 4 years ago

    the 'slide from the back of pickup to the ground' part sounds easy, but it's a 2.5' drop! Are you recommending pulling out the machine and slowly lowering one end down to the ground, and then swiveling it and lowering the other side? We're talking 270 pound (well, less without the pallet).

    #6 4 years ago
    Quoted from Billc479:

    If they are using a pup trailer the driveway is not a problem. A 53’ box trailer could make it, if backing from the right side of the road.
    Either case, do they have a lift gate? If not, I don’t know how you get it out of the trailer.
    Opening it up outside may be your option. A hand truck likely won’t work well with a small pallet.
    Kind of curious how you solve this. “Inquiring minds want to know”.

    Yes they do have a lift-gate on the truck.

    #7 4 years ago
    Quoted from Billc479:

    If they are using a pup trailer the driveway is not a problem. A 53’ box trailer could make it, if backing from the right side of the road.
    Either case, do they have a lift gate? If not, I don’t know how you get it out of the trailer.
    Opening it up outside may be your option. A hand truck likely won’t work well with a small pallet.
    Kind of curious how you solve this. “Inquiring minds want to know”.

    Ordinarily I'd crowd-source the problem with multiple people, but this virus has us all separated. Hopefully the driver is experienced and can help with a solution.

    #11 4 years ago
    Quoted from darcangeloel:

    This is how I would do it. Won't hurt it. I've done regular pins out of the box this way by my self. Most of the weight is leveraged between the tail gate and then the ground fairly rapidly. With you and the wife it should be easy . Also I use a residential dolly every time I move a pin and have never had a problem. Make sure the tires are pumped up otherwise it will be even harder.

    OK. thank for the advice, and it's good to know you guys have done this kind of move before with success. I'm a bit nervous about it as I am totally jazzed to get this game at all, and don't want to screw it up. I'll report back tomorrow if the delivery makes it here.

    #16 4 years ago
    Quoted from elcolonel:

    After reading through this thread, I firmly believe, that you are nervous.

    It's one of those things like cutting down a tree with a chain saw. research first, do some planning, then be careful with your first one. and every one thereafter.

    #17 4 years ago
    Quoted from Yelobird:

    As this is your first NIB...
    1. Inspect the Hell out of that box for Any questionable damage. If not certain plan B Open the box!
    2 Everything KingPinGames said but Important, when sliding the game off the truck to the back of your pickup truck make Sure the Top of the game goes in First or when you unload it, it will be sitting on its head.

    Thanks for the tips!

    10
    #19 4 years ago

    update: big semi arrived at the end of my gravel driveway...driver was a pro. got the machine to my pickup, and loaded into the garage with no issues. thanks for all the reassuring advice. After playing 2.5 games (chaos multiball!! T-rex multiball!) the machine suddenly went dark. been troubleshooting for a couple hours with distributor and via email with Stern. Evidently the CPU crapped out and they're sending me a new one. sigh. that's another thread in another forum. always something. stay healthy all...

    You're currently viewing posts by Pinsider stoneycreek.
    Click here to go back to viewing the entire thread.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


    This page was printed from https://pinside.com/pinball/forum/topic/moving-a-nib-machine-from-semi-truck?tu=stoneycreek and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.