I have to move all my pins in one run. Going to rent a uhaul. Trying to decide whether I should stand them on their backs and ratchet strap them to the walls, leave them on their legs with back box down and strap them in or some other way. I'm hoping someone who has done this can chime in and give me some insight. Thanks.

So its looking like the best way is legs up, back box folded, wrapped with blanket and shrink wrap. Then 3 per row.
Tatman999 when you ratcheted each row you just went straight across each side wall putting a bit of tension pulling towards the cab?
Looks like I can do the 4 rows. Strap the last one by itself. Other last one is RFM so I'm thinking of leaving it on its legs and wrapping it up and ratcheting to a wall. Think a 15 ft truck will cover it?

RoyF, agreed I's rather go too big. Cost difference isn't much. If 15ft works I'll probably go with the 20. Uhaul is my only option where I'm at.

I ended up with the 15ft truck. 14 pins. 13 standing on their backs with head folded in legs off. Rfm stayed on its legs. Was a snug fit but everything made it on the truck.