You're currently viewing posts by Pinsider gorgar666.
Click here to go back to viewing the entire thread.
Quoted from ChrisHibler:Run a ball through there to see if the switch is being cleanly actuated.
--
Chris Hibler - CARGPB #31
http://www.ChrisHiblerPinball.com/Contact ... for board repairs
http://www.PinWiki.com - The Place to go for Pinball Repair Info
I see 2 switches down that wire form. Which is it? Thanks in advance!
Spooky kit on Pinball Life! Cut the diode off!!!
BBA5249E-3A20-42AA-9FAA-5F68D4F960A8 (resized).jpegC4B8B7A6-188D-4FE1-ADD0-13392FA0B65F (resized).jpegF214E960-2F3F-4DE9-A286-EB5F12CBAB9A (resized).jpegF978AED6-AF98-4F46-9149-8BB9E3B5CDAA (resized).jpegFBC4C2B6-32A0-46D8-96F5-567E45F86717 (resized).jpegQuoted from ChrisHibler:Sweet!
--
Chris Hibler - CARGPB #31
http://www.ChrisHiblerPinball.com/Contact ... for board repairs
http://www.PinWiki.com - The Place to go for Pinball Repair Info
My Sterns next!
image (resized).jpgQuoted from ChrisHibler:Gorgar666, Where do the brown and green wires attach to the board set?
Can you post a pic of where they connect?
--
Chris Hibler - CARGPB #31
http://www.ChrisHiblerPinball.com/Contact ... for board repairs
http://www.PinWiki.com - The Place to go for Pinball Repair Info
Available labeled “Knock”connect on
the driver board. Fits perfectly. Molex lock tab perfect.
Quoted from Gorgar666:Available labeled “Knock”connect on
the driver board. Fits perfectly. Molex lock tab perfect.
Quoted from Gorgar666:Available labeled “Knock”connect on
the driver board. Fits perfectly. Molex lock tab perfect.
Included wires reach perfect. Predrilled holes already there!
Quoted from Zablon:Wait..there's a shriek knocker??
Audio sound of a Knocker...actually pretty close to physical sound.
Quoted from ChrisHibler:Even though I’ve turned off the shriek knock, when I won a game, no knock. Is there another setting?
—
Chris Hibler - CARGPB #31
Http://chrishiblerpinball.com/contact
http://www.PinWiki.com/ - The new place for pinball repair info
I originally forgot to cut off the diode. Blew a fuse! ....all good and knocking now!
Man, I checked the switch to frank ramp. Everything looks fine. But super fast pass throughS don’t register frank to drop.... different subject. Glad you got it working. Mine is switched to off knocker.....
Quoted from ChrisHibler:I took your advice and had cut the diode prior to install. It works now, but only with the A2.17 set to yes.
With A2.17 set to no, I won games via score, HSTD, and special, and no knock, no twip.
Strangely, I set the match percentage to 50% and had to complete 8 games before it matched. Odds of that are 1 in 128, or black coming up 7 times in a row
before a red at the roulette table.
The knock isn't classic Bally/Williams "THWACK" loud, but way better than the twip. I'm going to experiment with different knocker assemblys.
I'm going to do my IronMan now (S.A.M. system) and will document both of these methods in the PinWiki.
--
Chris Hibler - CARGPB #31
http://www.ChrisHiblerPinball.com/Contact ... for board repairs
http://www.PinWiki.com - The Place to go for Pinball Repair Info
Where is match perfect adjust? Thanks. I’m a do the same I want to hear the knocker more often. Lol 50%
Quoted from SuS:When my MBRLE arrived, Creature was pinned against the underside of his lagoon glass/plastic. I adjusted the spring so he's not pinned against the glass. Now he dances around. Much better.
is he supposed to dance around? mine doesn't move...
You're currently viewing posts by Pinsider gorgar666.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monster-bash-remake-tweaks-and-fixes?tu=gorgar666 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.