Monster Bash (Classic Edition)
Chicago Gaming Co., 2018
Monster Bash (Limited Edition)
Chicago Gaming Co., 2018
Monster Bash (Special Edition)
Chicago Gaming Co., 2018You're currently viewing posts by Pinsider tracelifter.
Click here to go back to viewing the entire thread.
Had to go to Fontucky to get the game and a pallet of peanut butter fell over in the trailer so we waited the 2 hours for them to clean the mess to get to the game.
Damn game sat down there since the 24th and the only way to get it was to drive down there an hour each way.
For the price you would think it would come with a keytag. :/
Anywho it is here and looks and plays great!
MBr 005 (resized).JPGQuoted from RCA1:Hadn't heard that one before.
Looks great!
Fontucky is what us mtn folks call Fontana, smells like diesel and old socks.
"It was hotter than Hooker in Heater today, and hotter than Heater in Hellmouth, where the high was 137 degrees".
Quoted from Rdoyle1978:1) don’t think so, it’s not the same as ColoDMD
2) in the adjustments menu there is a minimum volume override you will need to set in order to allow it to go quieter
3) mezelmods sells a plastic shooter lane protector, I just installed it yesterday. Seems to work great for original or CGC MB
On the scoop - if it’s got a Cliffy on it already, you should consider the Mantis protector. It goes inside the scoop and gives you a hard metal lip which protects the wood. Lined up correctly, you don’t need the top-of-playfield Cliffy (although it doesn’t hurt to have both)
My MBr SE came with both a Cliffy type and a Kerry (Mantis) type installed.
Not going to pay 50 bucks on Fleebay for a MB keytag, got a pair Creech and Universal Monsters for 17 bucks.
Game plays sweet, had to adjust Drac's coffin other than that no problems so far.
I might get AFMr SE next unless I can find a SSTIF in So Cal.
Quoted from Who-Dey:You can say that again. There's a noticeable difference in quality between CGC and Stern.
Yup, major difference! Looking for an MMr to buy but I will get a AFMr if I can't find one.
Stupid money asked for a MB keytag on Ebay, bought this pair for 17 bucks.
Umonsters 001 (resized).JPGUmonsters 007 (resized).JPGDone with Ebay, made the mistake of signing up for Paypal who then froze my CC.
They now want another card so I guess they can void that one also.
I closed my Ebay account and blocked all emails from them.
Now I cannot buy from any seller that uses PayEnemy.
I guess Ebay is controlled by PayEnemy and can do nothing to fix the problem.
Quoted from atipinball:I’m having an issue with the ball frequently getting stuck behind the scoop for the creature of the black lagoon. If I move the guide rail on the right or the bracket holding the sign above, it will release the ball with ease. Any suggestions on how to fix this?
[quoted image]
It looks like you just need to tweak one side of the guide a bit to stop the ball from wedging in there.
Quoted from atipinball:I have not done anything like that before. How would I go about making that adjustment? Thanks for your reply.
Underneath the playfield locate the nuts that hold the guides, loosen them and move the guide over and tighten the nuts while holding the guide over.
Don't over tighten! Just snug is fine.
Quoted from mostater:Looks like it fell under the slings more or less. And it could be a portion of a spring that broke off as others have mentioned and not a clip. It has the same or similar diameter as the springs on the slingshots, but those springs look fine. I even counted the # of "loops" on each and got the same count. The game plays fine. So, I dunno... The search continues.
If it is a new game it might be a piece of a spring in the batch of springs used for your game that was hanging off the spring.
Pieces are part of the manufacturing process.
You're currently viewing posts by Pinsider tracelifter.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monster-bash-remake-mbr-owners-club?tu=tracelifter and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Shepherdsville, KY