Just joined the club. First Q: I made sure Phantom Flip was turned on in settings, tried a factory reset, but PF still scores 500K — it never lights the lanes. Anyone know what could be going on?

BTW I’ll be installing the new ultra thin play field protector and can report back on that.

Thank you!

Anyone have any idea why Phantom Flip isn’t working/lighting out of the box?

Thanks!

Anyone know what voltage the bill acceptor takes on MBR?

I’m getting crazy airballs off of Frank’s Monster when he’s in standing position. Plastic is gonna get broken. Is there an angle of stance that corrects this? Or are airballs just a thing with MB?

They are! I didn’t know we were all cranking them down. Thanks.

Anyone know if MBR comes with standard rubber rings (or silicone)?

There’s a whole thread about this, but the scoop is wildly inconsistent on my MBR which gets lots of plays on location. Here’s what I’ve tried:

Adjusting the power
Repositioning the assembly (there’s really only millimeters of wiggle room) by loosening screws and re tightening.
Polishing the scoop to reduce spin
Raising the plunger up 1/8 inch (and tried 1/4 inch) to have the ball rest on it

None of this has worked. The ball can hit anywhere from the slingshot to SDTM.

I think the plunger has uneven wear already (!) and is the main culprit.

I’m going to open a ticket.

I don’t think foam will work for my location machines. It will get worn and tattered pretty fast. It’s great for home use, though.

I think I’ve solved scoop straight down the middle shots! I ran a 1/4” by 1” strip of moleskin down the right side of the *top* of the scoop and that’s prevented any SDTMs, seemingly. All of my foam options wouldn’t stay in there and was too invasive anyway, sending balls into the left sling. A thin felt (super adhesive) was just thick enough. Try it out! I hope this gets another pass at the design at some point.