Monster Bash (Classic Edition)
Chicago Gaming Co., 2018
Monster Bash (Limited Edition)
Chicago Gaming Co., 2018
Monster Bash (Special Edition)
Chicago Gaming Co., 2018You're currently viewing posts by Pinsider TJG81296.
Click here to go back to viewing the entire thread.
Well, Christmas came and we have one happy 8 year old (and perhaps a happier Dad). Anything we should know to do to MBr to keep it in shape? You can see a picture is worth a thousand words!
Photo Dec 22, 9 14 41 AM (1) (resized).jpgPhoto Dec 25, 6 19 50 AM (resized).jpgPhoto Dec 25, 6 19 52 AM (resized).jpgPhoto Dec 25, 6 19 56 AM (resized).jpgAnyone have any ideas, new machine (3 days old) played a lot last 3 days. The left kicker stopped working. I looked at wiring and everything is connected. When I toggled through the tests I can see the right listed but no left for switch test. I was able to test the solenoid and that does kick. Any ideas what would stop the switches from functioning? Should they show in the switch test list? I have rebooted the machine, no help. I did also find two bolts that feel out when I lifted the play field, one from Frankenstein and one from the launch solenoid. Do you all put loctite on these if they back out? I had some trouble with the down switch on the Frank table after I snugged it so I loosened the three bolts I tightened and let is settle, then snugged again. Thanks in advance! Tom
Quoted from raycasual:im very interested in buying a remake but I hear the LE’s are all sold out and that version is the only one that comes with the rad topper.
a few q’s....
Quoted from gunstarhero:The LEs come up for sale all the time, and while I’m sure CGC sold out of them I bet you can find one at a distributor if you make a few calls. Good luck!
Call Mike from Automated in Milford CT +1 (203) 877-8911. He may still have an LE. I just got mine from him, delivered. Great guy to deal with.
Quoted from LTG:Tests - Switch Edge - do they register on screen when pushed closed ?
If not check if they are stuck closed, check for broken wire at leaf blade switches, and follow the wiring to be sure their connector is pushed onto board tight.Not first time. Might consider Locktite blue if they keep falling out.
LTG : )
LTG - thank you. I tried the switch edge test the left doesn’t show up. I’ll check the switches again and the wiring. I reached out to Automated where I got the machine from and the tech is gonna walk me through troubleshooting as well. Thanks so much!
Question: When you shoot the right ramp (Lady Frankenstein) with enough velocity do you find the wire rails catch the ball and stop, then it comes back? I am wondering if this is normal or if the wire rails are spreading and snagging the ball. Do you feel an adjustment is needed or is this normal? It needs to be a clean shot right up the ramp and it will get caught up and stop. most shots get by just fine. If the wire rails require adjustment, how best to accomplish? Thanks in advance! LTD - I am still working on that left kicker and will report back once the troubleshooting is complete!
Quoted from TJG81296:LTG - thank you. I tried the switch edge test the left doesn’t show up. I’ll check the switches again and the wiring. I reached out to Automated where I got the machine from and the tech is gonna walk me through troubleshooting as well. Thanks so much!
LTG finally spent time on this issue. Rubber must have been keeping the switch depressed. some adjustments but now they're working normally. Thanks for your help!
Tom
You're currently viewing posts by Pinsider TJG81296.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monster-bash-remake-mbr-owners-club?tu=TJG81296 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
St. Paul, MN