hi alll, not sure if this is the place to post this but, does any know if the pdi black mirrors blades will fit on a MBr se?.

thank you

I got my CGC mirror blades from Planetary. You need to order the left and the right separately, perfect fit for MBr:

http://www.planetarypinball.com/mm5/merchant.mvc?Screen=PROD&Product_Code=PPS-AFMR-MIRBLDR
http://www.planetarypinball.com/mm5/merchant.mvc?Screen=PROD&Product_Code=PPS-AFMR-MIRBLDL

The Williams/Bally ones should fit. Email Joey at Pinball Decals and he will confirm for you: [email protected]
Those super thin felt strips he sells would be a good idea as well. I installed them on my MBr.

That's cool but where in the world would it fit on this game unless its part of a topper

Thanks!

It’s going to be on top of the Frankenstein ball lock next the Dracula’s coffin.

Nevermind I ended up buying the LE instead of the SE

OMG is this going to be a real mod? If so will it be a projector into the floor?

New Tesla coil replacements.

34E4DDA1-BA18-4D15-AAF7-63B5F28301CF (resized).jpeg

5DC39EED-1B61-4D3B-B335-3401B3614049 (resized).jpeg

C48B84A1-F1A4-43D8-9D38-C782DA8ED32B (resized).jpeg

I feel like I am the only one having issues with the wooden Frankenstein table mod. Now during Franks multi ball and monsterbash, Frank just doesn't register any hits. Is there any adjustments you guys had to make to get it to work correctly. I mean, with the glass off I have to push on the chest of Frank all the way back to register a hit...

I guess another question is on the back of frank, is that lever supposed to hit the switch to register the shots? I know that isnt center. I don't know, I am just spit ballin here...

I am having the same issue. Have not had time to try to figure out. Would love feedback as well on this.

Send a note to [email protected] and she will assist.

Email sent thanks!

The lever is used to hold Frank’s arms down when he is on the table, nothing to do with the bash switch.

You guys just need to bend the switch arm outwards a bit so it protrudes more, and will trigger more easily. Make sure you’ve installed the table correctly too - there shouldn’t be much difference in the switch action when it’s installed

Or you can paint the table

IMG_2701 (resized).jpg

IMG_2696 (resized).jpg

These 3D Flipper Caps look great on Monster Bash! Available here on Pinside or at pinbossmods.com. First time ordering? Use code pinboss10 at checkout for 10% percent off.

IMG_20190610_110715 (resized).jpg

IMG_6096 (resized).jpg

Looks good too!

marksf123 Who did your customization? That paint scheme is the nicest I have seen!

Looks like Modfather. He's pretty close to you and paints fast; you can get your stuff back in 2 days!

I was wondering that, Rob...let's get confirmation and then I may have to drop some parts in the mail.

Think the wolfman plastic should have always been a toy, so I bought a wolfman off of eBay and installed it here

image (resized).jpg

What brand is the Wolfman? I checked ebay and most have fabric clothing. I prefer a plastic mold.

Thanks

I searched wolfman toy and came up with a lot of different ones. This one is cool. ( I'd search for cheaper )

ebay.com link: The Wolfman Universal Monsters Werewolf Benicio del Toro Mezco Toyz 2009 NEW

LTG : )

This figure is the one I have installed - this is a “silver screen” one, but there is also a full color one. This figure is the best match for the scale of the other figures. Mine is mounted in front of the Wolf man plastic in the back (I made a special Mount) so the moon flashes behind him as intended. Really
Looks awesome.

Modfather did a special paint job on him which matches the game.

ebay.com link: 0

It’s a jack in the box action figure. I have painted it to match the one in the game. Little smaller than the sideshow toy ones, about the same size as Frankenstein!

For MBR - does anyone have a good location to tap 5v - I'd like to add a few spotlights in.

Thanks

Looks great. Love to see another 3d printer here. Can you post the STL ro thingiverse? Here is my custom Tesla coils and mount. I need to tone down the purple in my machine, but that is what the LED kit said to out in...

20191112_201233 (resized).jpg

20191112_201246 (resized).jpg

Anyone install disco ball ? Looking where to get power / plug in location ?

Thanks

anyone have any experience with the Ultra Violet Flipper Light Mod Kit on Pinball Decals? I love UV lighting and think this would look sweet but my experience with UV lighting is that it can mess with your eyes when looking directly at it for a prolonged period of time and don't want it to diminish the lighting effects of the rest of the playfield. thanks in advance for any insights.

How much?....

Thanks! Bigger than I Imagined!

image (resized).jpg

I added the color DMD chip. It was expensive at $399 for a simple CHIP, but I think it is an significant improvement. The graphics are way better and I think I'm also hearing some call outs that I hadn't heard before. I had to make some adjustments in the playfield brightness cause all of a sudden it was too dark.
But it's all good now. Interestingly the DMD itself is actually a lot LARGER than the backbox cover of the Classic Edition makes visible. I wondered if anybody had figured out a way to make use of the additional display real estate like the SE & LE do?

Are these plug and play and how are they controlled (on/off and dimmer)?

Thanks! Purchased the trough and spot lights!

I know these have been out for a while now but was curious what the difference is between the original and the ones from Mezel (besides a clearish dome vs. purple).

The Mezel ones look. Way. WAY. better. They are also secured to the game in a slightly more helpful way. The original ones you have to manhandle to get off, and the purple globes break all the time when you are trying to replace the flasher. At least the original williams ones do. Then the little retainer that goes on the bottom to hold the globe in place falls off. The design sucks. The mezel design is sealed, so you just sort of plug and play.

Any other mods people have done, or have pics of?

I'm surprised there isn't pop bumper cap replacements (hooked on pinball style)
I have some mods on order and some on the wait list.

EDIT:
Only other mod I can think of is remaking the LE topper.... has anyone seen the wiring of the oem topper and pcb etc?