Needing a little help with a Monster Bash.
Everything works great except the ball won't feed into the launch lane. I ran a test and got the following;
Check F1 Right Flipper eos
Check Switch 47 Left Flipper Proxy
Check Switch 43 Right Flipper Opto
I'd apprciate any help in getting the game running. My tech skills are minimal and I'm hoping the fix is easy.
Thanks in advance.
Quoted from PismoArcade:Check F1 Right Flipper eos
Tests - Switch Edge - Move the right flipper bat up and down, if the right flipper EOS doesn't report on the DMD, check it and the left EOS for a broken wire.
Tests - Switch Edge - push flipper buttons in slowly - see if two optos register on each side, first lower then upper. Might need cleaning or opto interrupter not doing a good job or bad opto on flipper button opto board. Be sure both left and right sides are plugged in tight.
Ball launch - All the other coils working ? if some aren't pull and check it's fuse with a meter. If all are working, then check coil for a broken wire at the lugs, especially the thin wire from the coil to the lug, easy to have a crack or break you can't see.
LTG : )
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monster-bash-not-feeding-ball-into-launch-lane and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
St. George, UT