Quoted from Williampinball:

I am looking too get in the club but need too buy one in Canada Ontario if anyone knows of one

Quoted from Skyemont:

I didn't think I would like it but I do. Need to get custom apron cards now.

Quoted from Cobra:

I just picked one up little more than a week ago. New decals and PF with lots of clear on it.

Quoted from Cobra:

Is that Shaun's old one?

Quoted from Cobra:

Sweet. Played it many times. It is a very nice one. Congrats.

Quoted from gunstarhero:

Decided to do some new rubber and bulbs on the MB and that turned into a little bigger operation than I was planning:
Replaced all bulbs with Comet 2SMD Frosted Sunlight LEDs
Replaced rubber rings with Titan GITD Green and Purple Titan flipper rubbers
Replaced post sleeves with Cliffy post sleeves
Refreshed flippers (didn’t need a whole rebuild) with new coil sleeves
New mosh pit Cliffy
New Mantis mosh pit scoop
New Frank flap
New Drac (now with more feet!)
New Mummy Sarcophagus lid (now with less broken!)
New slingshot plastics (still waiting on the right one)
New flipper bats
New upgraded cab speaker
New coin reject inserts
[quoted image]
[quoted image]

Quoted from tonyf1965:

MB is probably my favorite game.

Quoted from Axaios:

Hello guys,
Member of the Monster Bash owners for about six months however this is how long it took me to finally bring it home.
Major repairs and improvements took place those six months.
... and I can honestly say that is the best game I ever played. So far at least!
So, just arrived today and it's magnificent. Most probably the only unit in the country .
I have spent a lot on it trying to repair all of its issues and also trying to improve it.
Top quality Colour DMD.
Inner side decals.
New cabinet decal set of special printing to much the original.
New pop bamper covers.
New purple flippers.
New rubbers
New LEDs.
Electrostatically painted all metal parts, legs and side bars, electric blue with pearl colour.
Electrostatically painted coin door and head holders in semi gloss black colour.
Chromed leg screws.
Ghost mod added.
Bought a new working (used) drive board.
Replaced broken plastics
...and others
The only things left to do is to replace the back glass LEDs with super bright colour LEDs to give more life on it and also to place metal protectors frames on the target holes which are ordered all ready.
I am so happy
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Quoted from Kobaja:

What a response...

Quoted from wackenhut:

Wanted to get thoughts on Trade Value:
Original very nice Monster Bash for NIB Godzilla Premium

Quoted from gamera9:

Heard 2 quotes last night I had heard before. One was just a scream and the other was Dracula saying I was a pain in his ass?

Quoted from DavidCPA:

The scream has to do with your bonus multiplier and you get more that 10 million, I think. The other quote is actually, "pain in my axe" referring to his guitar.

Quoted from tonyf1965:

Even though I do not play my MB that much it is still one of my favorite pins. For the wow factor. Wow look what, I just got it to do. When people come over. One game and they are hooked.

Quoted from JMK:

Thanks for your input. I have tested all the rollover switches in the loop which all seem to test fine, both manually and with a ball rolling over them.
There are no switches in either of the gates that I can see.
Springs seem all attached underneath the pf. I can manually activate both gates with my hand.
I also checked the wiring & connectors under the pf by the right gate assembly.
Everything seems to check out fine but I’m still getting the same Right Gate Stuck Closed error. Wondering if it’s the coil at this point?
Thanks!

Quoted from LTG:

He's done all that.
I last suggested checking common wire at the coils it all goes to for a break. Red wire brown stripe, page 3-6 in the manual.
LTG : )

Quoted from rx3:

I've also had roll over switches that test fine, but don't actually activate during gameplay. I know that sounds unlikely, but it's actually a thing with Williams switches. They get dirty inside. It wouldn't hurt to replace them with new switches, They're cheap.