Monster Bash
Williams, 1998You're currently viewing posts by Pinsider pedleboy.
Click here to go back to viewing the entire thread.
I'm helping a buddy with his MB. One of the drac mounting bolts is slightly raised on the playfield. My question is, how do you lower one? Is it just pressure fit and you can hammer it down (carefully) or is it threaded in? Thanks!
D.
Quoted from Rdoyle1978:Don’t hammer it - you could potentially crack the clearcoat or worse. Take the mech off the bolts, and attach a big washer (Several is better) to the bolt in question, and tighten the nut down until it’s flush. Be REAL careful, because if there’s not enough clearance under the bolt (which is tough to tell), you can snap the bolt off. I’ve done it twice -
This is what I thought. And if you break it off, you're f'ed?
D.
You're currently viewing posts by Pinsider pedleboy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monster-bash-club?tu=pedleboy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
South Portland, ME