A+ for Titan Glow-in-the-dark rubbers! Followed the manual and ended up a little short, so placing a follow-up order with Titan. I put an updated kit on their site for MB. Maybe some flipper lighting from Pinball bulbs will really make them pop.
You're currently viewing posts by Pinsider hd60609.
Click here to go back to viewing the entire thread.
They look and play great. Still really glow. I did put an LED black light bulb above the game... makes the playfield and rubbers "pop"! Funny that you are asking... Last night was the first time I had to change a flipper rubber. I had a spare on hand. Seems like it wore thin at the tip of the flipper then broke. The other flipper has the wear area starting, but still OK. No wear spots on playfield rubbers... Got dirty once so I wiped them clean with rubber cleaner (PBL) and they look brand new.
Nice job! It almost looks like you photo-shopped the dirt in, it so bad. Did you do a complete tear-down to clean it? Days? Weeks? Months?
Complete for my game with just a couple extras. I feel like there can always be a post that someone changed here or there that may need a different rubber. You can cross check it with the other kits to be sure. I'd also add a second set of flipper rubbers... those will be the first to wear...
I learned here on Pinside that you can loosen the scoop bolts under the playfield and slightly re-position it. It worked for me. someoneelse is right, it should go to the middle of the left flipper. I think there is a thread or two on this.
Need a little help here. I found a disconnected red wire/white stripe underneath the playfield in the middle. It comes from a harness with another red/white next to it, same length. That one is connected to a flasher.
Next time someone is underneath, can they check to see if both of these are connected to the same lead on the socket? I assume so, but never assume, right?
Thanks.
Monster Bash disconnected red white wire (resized).jpgQuoted from freegame450:Yes, both red wires with white stripe go to that flasher socket.
Absolutely the reason I love Pinside the most. Thank You!
You're currently viewing posts by Pinsider hd60609.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monster-bash-club?tu=hd60609 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.