You're currently viewing posts by Pinsider gunstarhero.
Click here to go back to viewing the entire thread.
Quoted from Mikespinball:Your new MB is scary! That is, it got scared so much that it changed from a Williams title to a Bally! LOL
Quoted from PhillyArcade:lol I had to do a double take but good catch!! lol what's up with that!
Lol it caused me to double take as well. I have a Williams panel and a ColorDMD ready to go tho!
Oh I remember this, lol. I thought for some reason you were talking like the XL display from the remake and I was like whaaaaaat?
This is pretty cool tho and I don’t know why ColorDMD isn’t all over it... besides the fact that I am sure they’re busy enough.
Okay wondering if anyone else has seen this... when you trigger the trough 4 opto on my MB the whole switch matrix lights up. When all 4 balls are sitting in the trough I get a row 1 short and a row 6 short. When the trough is empty or there are just balls in spots 1 - 3 everything is fine.
Quoted from Manny65:Not seen this sort of issue before ... maybe time for another coffee
If you do solve it please post what it was as I'm interested to know
It’s a problem on the 10 opto board; I swapped it with the one from my Shadow and the issue followed it. Not sure if it’s a diode or a chip on the board yet.
Decided to do some new rubber and bulbs on the MB and that turned into a little bigger operation than I was planning:
Replaced all bulbs with Comet 2SMD Frosted Sunlight LEDs
Replaced rubber rings with Titan GITD Green and Purple Titan flipper rubbers
Replaced post sleeves with Cliffy post sleeves
Refreshed flippers (didn’t need a whole rebuild) with new coil sleeves
New mosh pit Cliffy
New Mantis mosh pit scoop
New Frank flap
New Drac (now with more feet!)
New Mummy Sarcophagus lid (now with less broken!)
New slingshot plastics (still waiting on the right one)
New flipper bats
New upgraded cab speaker
New coin reject inserts
this was before the new scoop and waiting on the right sling
You're currently viewing posts by Pinsider gunstarhero.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monster-bash-club?tu=gunstarhero and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.