Monopoly
Stern, 2001Hi all. Could really use some help. I have a monopoly 2001 and on the electric sign one line has gone out. I disconnected and reattached the connections. Is the whole thing trashed or is there a way to fix it? It's the top right line of four. Or is the answer just deal with it 
Thanks.
Jimmy
I don't know if those LED modules are even sourcable. Did you check the solder connections on the back? Maybe there is a bad solder connection?
Those were used on a few machines (TSPP, Monopoly, Rollercoaster Tycoon) so I would think a replacement would be out there somewhere. Maybe you could just find the one module and solder in a new one?
Sorry that wasn't very helpful 
Chris
I have not but will see if I can. Thanks for the suggestions and if you find it lmk. Otherwise will replace. Expensive though :/
Jimmy
Quoted from SilverUnicorn:Did you check the solder connections on the back? Maybe there is a bad solder connection?
I've serviced a few bowler arcade games that have those LED displays in them. The problem is usually those solder joints on the back of those LED blocks, so that might be a possibility here.
Pin 9 appears to be associated with Row 1.
Quoted from ccbiggsoo7:mine went out it was the chip on cpu. it was scrambled.
thanks- which chip? Did you have to replace or reseat?
jimmy
Quoted from ForceFlow:I've serviced a few bowler arcade games that have those LED displays in them. The problem is usually those solder joints on the back of those LED blocks, so that might be a possibility here.
Pin 9 appears to be associated with Row 1.
https://www.schukat.com/schukat/schukat_cms_en.nsf/index/CMSDF15D356B046D53BC1256D550038A9E0?OpenDocument&wg=W3875&refDoc=CMS72E00884D8060F7EC125707C0049BA1A
http://www.datasheetarchive.com/pdf/download.php?id=42455833f65ecbf96bdd2dd8e55dd8fc3b65a2&type=M&query=LTP1557AC
Ill check those out later this week when I have a second. Just look for broken solder joints? Thanks!
jimmy
Quoted from Jimmyapple:Ill check those out later this week when I have a second. Just look for broken solder joints? Thanks!
jimmy
It might not be visible on the back side, so it may be better just to reheat and add some solder anyway.
Quoted from Jimmyapple:thanks- which chip? Did you have to replace or reseat?
jimmy
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/monopoly-electric-company-sign-issue and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
League City, TX
Überherrn